RunRyder RC
WATCH
 1 page 1078 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsV-Bar › VBAR NEO Transmitter Setup Simplified
01-09-2016 09:19 PM  4 years ago
Topic Vote0Post 1
Ronald Thomas

rrMaster

Gainesville, Fl, USA

MyPosts All Forum Topic
VBAR NEO Transmitter Setup Simplified
Hey guys, here is a quick explanation I sent a fellow pilot on how to setup the TX for the NEO. It simplifies the instructions and will work for any radio. I hope his helps and a video is coming

The first thing is you have to change the way you think for a little. Every other FBL system, including older vbars, setup differently than the NEO.
When you setup your transmitter, you will be turning it into a switch box. All it will do afterwards is turn things on and off in the NEO (banks, motor switch, throttle cut, and rescue). All of the actual functions of the Heli are controlled by the NEO.
So you need any three position function to control the banks (usually idle ups as Normal, Idle 1, and Idle 2 suffice), another three position function to control the motor switch (usually gear channel or the gyro channel), a two position function in the radio to control the throttle cut (usually gyro as it can be a two or three position function), and one more two position function to control rescue (like Aux 1).
You will set your throttle curves to 0-0-0-0-0 in normal, 50-50-50-50-50 in idle 2, and 100-100-100-100-100 in idle 2. That will then switch either the banks to 1,2,3 or the motor function in the NEO to Run, Idle, Off.
Then you set the gear channel's end points to 100, 50, 0 (or -100, 0, +100 depending on your tx). That will change the banks in the NEO from 1 (-100 in the to), 2 (0 in the radio), 3 (+100 in the tx).
And so on for the rescue and throttle cut (nitro only).
Once the transmitter is setup, then you follow the vbars wizard for the rest of the setup (follow the instructions from beginning to end and do not skip steps). Once you are done, you can either set the head speeds in the vbar program (when using the vbar gov) or set the "esc output" which simulates throttle curves in the radio to the esc.
Hope I got it all, if you have questions, fire away!!!
Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1078 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsV-Bar › VBAR NEO Transmitter Setup Simplified
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, April 9 - 5:16 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online