RunRyder RC
WATCH
 1 page 404 views POST REPLY
Home✈️AircraftMulti-Rotore-Multi-Rotor Main DiscussionDJI News  DJI Releases New Firmware V2.7 for A2
01-05-2016 11:24 AM  4 years ago
Topic Vote0Post 1
DJI Innovations

rrApprentice

Shenzhen, China

MyPosts All Forum Topic
DJI Releases New Firmware V2.7 for A2
The latest A2 firmware has been released. Download the A2 Assistant Software v1.9 from the product page on the official DJI website http://www.dji.com/product/a2/download?www=v1 to update your firmware.

Updates:

Firmware

Improved compatibility with the DJI GO app (Lightbridge 2 required):

(1) OSD flight data in Camera View including the control mode, battery voltage and battery warnings.
(2) Dynamic Home Point feature.
(3) In-app enabling of the Home Lock and Course Lock features.

Added PMU connection status detection:
(1) If detected before takeoff, the motors will not start and takeoff is inhibited. The LED module will continuously flash red four times. To resume normal flight, ensure that the PMU is connected correctly.
(2) If detected during flight, the LED module will continuously flash red four times, at which point you should land the aircraft and re-connect the PMU to resume the battery voltage readings and low voltage protection.
 After the home point successfully recorded, the LED module will continue flash purple five times when fly near the home point (distance less than 8 meters and GPS satellites> 6 required.).

Assistant
Fixed issue of abnormal display on the remote controller channel mapping page.

Note:
Ensure to upgrade the Lightbridge 2 firmware to the latest version.
SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 404 views POST REPLY
Home✈️AircraftMulti-Rotore-Multi-Rotor Main DiscussionDJI News  DJI Releases New Firmware V2.7 for A2
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, April 7 - 5:13 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online