Ft Worth, TX
My Posts: All Forum Topic
Just a curiosity question to you guys. I have both a 500 and a 570, and I am routing the motor wires outside the frames on both of them to the ESC down below. There isn't enough room inside the frames for the wires AND the battery to coexist in there!
The Goblins have a very narrow canopy as you know, so I've had to Dremel some pretty good notches so the sharp edge of the canopy does not scrape and wear the wiring. I did this to both originally, then I noticed recently that my wires are still getting gouged, so I cut out more of the notches. Hope this makes sense.
Do ya'll have the same issues? Thanks.
TREX 700e, Goblins 500 & 570, DT520e, Gaui X3, Synergy E5