RunRyder RC
WATCH
 1 page 497 views POST REPLY
HomeAircraftHelicopterMain Discussion › blade 450x
10-18-2015 11:39 PM  34 months agoPost 1
tjk1812

rrNovice

sunbury, ohio - USA

My Posts: All  Forum  Topic

I have a blade 450x with curtis youngblood total g flybarless setup. Problem is with my collective inputs. When I want to go up I'm getting negative pitch on blades...I'm aware the leading and lagging are reversed on blade helis but I'm trying to reverse and can't find a way to do it. I have dx6i transmitter and nothing is working. Also..anyone familiar with the total g...why are the servo throws so limited on collective range? On computer setup screen, on 120ccpm servos throws are short..flybar and 140 ccpm the servos range is much more. Thanks.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-19-2015 04:01 AM  34 months agoPost 2
dkshema

rrMaster

Cedar Rapids, IA

My Posts: All  Forum  Topic

Forget the amount of throws until you get the rest of the system properly set up.

Your 450X wants to see the swashplate move down for positive pitch. Don't mess with the geometry.

In your DX6i, make certain you have helicopter mode set, and that you have 1 Servo, Normal swashplate type selected. Set all the channels in your DX6i to "normal" (not reversed).

Look at the Total G manual and connect the three swash servos to the Total G as shown. Servo position as well as servo plug location is important.

Use the Total G software to get all servos moving correctly. Don't mess with the transmitter settings.

-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz

PM  EMAIL  GALLERY  Attn:RR  Quote
10-19-2015 03:43 PM  34 months agoPost 3
jschenck

rrProfessor

La Vista, NE.

My Posts: All  Forum  Topic

I have no experience with Total-G

But, in general to change pitch direction go into the swash mix menu and change Pitch from a POS to a NEG. So if your current value is 60%, change the pitch to -60%.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-20-2015 12:25 AM  34 months agoPost 4
tjk1812

rrNovice

sunbury, ohio - USA

My Posts: All  Forum  Topic

Thanks for helping Dave..got it corrected..I see all the mixing is done in the total G.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-20-2015 01:59 AM  34 months agoPost 5
dkshema

rrMaster

Cedar Rapids, IA

My Posts: All  Forum  Topic

Jschenk ... the Total G does all the magic and all normal TX CCPM stuff gets disabled.

-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 497 views POST REPLY
HomeAircraftHelicopterMain Discussion › blade 450x
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Sunday, August 19 - 6:45 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online