RunRyder RC
WATCH
 1 page 1499 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsAlign GPro › Is the Gpro to be scrapped by Align?
10-15-2015 06:56 PM  34 months agoPost 1
nigel armstrong

rrNovice

Bedlington Northumberland England

My Posts: All  Forum  Topic

Just had a look on another forum to see that Align are to start and sell the 550L Dominator wit a BeastX Plus FBL unit. Is this the end of the Gpro?

PM  EMAIL  GALLERY  Attn:RR  Quote
10-16-2015 12:40 AM  34 months agoPost 2
MrMaster

rrNovice

Africa

My Posts: All  Forum  Topic

I just checked on the align site and there its still with gpro but I have seen posters on facebook that says different... Would love to know the story.

The unit worked pretty well actually, so not sure why. Maybe they had issues

PM  EMAIL  GALLERY  Attn:RR  Quote
10-23-2015 11:32 AM  34 months agoPost 3
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

The Gpro worked ok but still chinenglish instructions and the tail was hard to get right. I've tried others but always come back to BeastX, German and no PC or separate interface needed.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-23-2015 01:09 PM  34 months agoPost 4
Funky Trex

rrElite Veteran

Westerville, OH - USA

My Posts: All  Forum  Topic

I own/have owned most of the name brand flybarless units. They all work pretty good when setup properly although some seem to have more bugs than others. Some are easier to setup than others although if you know how your heli should react on the bench you can figure them all out before test flying so you only need to work out gain settings and flip/roll/piro speeds once they are airborne.

I still keep coming back to the 7200 Beastx. They just work and always fly consistent. Its the one flybarless system I have had 0 issues with and I fly them in 9 of my helis. I have VBar Minis, Bluelines, Silverline, GPros, 3GXs, etc sitting on my shelf (as well as others I have sold) because I don't have a reason to pull the 7200s. Beastx works. I am glad Align will have Beastx units in future kits.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-26-2015 10:52 PM  34 months agoPost 5
knightofcarnage

rrElite Veteran

chicago

My Posts: All  Forum  Topic

Have anyone tested rescue on micro beast plus? Does it work like the one on vbar NEO?

PM  EMAIL  GALLERY  Attn:RR  Quote
10-29-2015 08:17 PM  34 months agoPost 6
nigel armstrong

rrNovice

Bedlington Northumberland England

My Posts: All  Forum  Topic

[quote]Have anyone tested rescue on micro beast plus? Does it work like the one on vbar NEO?
Is it right that you have to pay for the software upgrade to get "bail out" on a BeastX?

PM  EMAIL  GALLERY  Attn:RR  Quote
10-29-2015 08:43 PM  34 months agoPost 7
knightofcarnage

rrElite Veteran

chicago

My Posts: All  Forum  Topic

I know about the upgrade fee, but does work as well as the NEO's. In other words example you are inverted does pyro filp out?

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1499 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsAlign GPro › Is the Gpro to be scrapped by Align?
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Thursday, August 16 - 11:51 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online