RunRyder RC
WATCH
 1 page 502 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsV-Bar › Y harness to ESC instead of servo
09-03-2015 12:32 AM  4 years ago
Topic Vote0Post 1
RappyTappy

rrProfessor

Encinitas, CA

MyPosts All Forum Topic
Y harness to ESC instead of servo
Quick question. Im going to be running a lipo to input RXC and want to run a second power connection to the vbar from the lipo. I understand you can use a y harness in line with a servo but Id rather not put connections between the servo and vbar.

I was wondering if there is any issue having the esc signal go into RXB and splicing in power from the lipo to the same input? I will not be connecting the positive/negative to the esc it will be directly to the vbar with the signal wire from the esc in the same connector on RXB. I am using a YGE 90LV. Thanks
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-03-2015 01:57 PM  4 years ago
RappyTappy

rrProfessor

Encinitas, CA

MyPosts All Forum Topic
Mikado answered my question it will work.Still buyin' and flyin' then crashing and cryin'
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 502 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsV-Bar › Y harness to ESC instead of servo
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Monday, August 3 - 6:44 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online