RunRyder RC
WATCH
 1 page 1103 views POST REPLY
Home✈️Aircraft🚁HelicopterAlignT-REX 600N › Align 600N Wiring Pictures
06-27-2015 02:20 AM  4 years ago
Topic Vote0Post 1
dchekas

rrKey Veteran

Farmington, CT

MyPosts All Forum Topic
Align 600N Wiring Pictures
Just finished installing the metal elevator servo bracket, and wanted to share some pictures of the final wiring, since the 600N can be a tough model to get clean wiring on.

Team Align, Team Futaba, Team Byron Fuels, Team Thunder Power
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-28-2015 09:40 AM  4 years ago
HeliHov

rrNovice

NorthEast USA

MyPosts All Forum Topic
Nice job and very clean looking. Wiring pics can be very useful. Have you flown it yet and how do you like it?.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-28-2015 03:12 PM  4 years ago
dchekas

rrKey Veteran

Farmington, CT

MyPosts All Forum Topic
Yes, this model has about 50 flights on it.

It's been a fun new challenge to come back to and fly after focusing on the 700N and 700E the last few years.
Team Align, Team Futaba, Team Byron Fuels, Team Thunder Power
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-28-2015 10:03 PM  4 years ago
datidun

rrElite Veteran

N Ireland

MyPosts All Forum Topic
Is this part number H60183MT Elevator bracket,was looking to fit this on mine but cant see it in your photo
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-28-2015 10:20 PM  4 years ago
dchekas

rrKey Veteran

Farmington, CT

MyPosts All Forum Topic
Yes.

With the DFC model, it does require some tiny moding to fit. It will rub the rear canopy mount cross member slighty.

I used a dremel with a sanding drum to just lightly shave down the affected area. Only need to remove ~.5mm of material or so.

Really cleans up wiring and protects servo better. I was able to eliminate a servo extension.

Team Align, Team Futaba, Team Byron Fuels, Team Thunder Power
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-28-2015 11:19 PM  4 years ago
ICUR1-2

rrElite Veteran

Ottawa, Ontario

MyPosts All Forum Topic
Align should have included this part with their kits IMO.

I installed the same thing a couple of years ago it really finishes the kit properly
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-29-2015 12:43 PM  4 years ago
datidun

rrElite Veteran

N Ireland

MyPosts All Forum Topic
Ok thanx,yes I thought with the new DFC model the elevator bracket would have been in the kit,also is anybody using the new black set of gears HN6064BA and H60020A,is there any difference in these upgrade gears suppose to prevent locking up,thought they would have also been in the new DFC kit.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-29-2015 02:14 PM  4 years ago
dchekas

rrKey Veteran

Farmington, CT

MyPosts All Forum Topic
The 600N DFC kit does include the new black gears and the new gear hub case.Team Align, Team Futaba, Team Byron Fuels, Team Thunder Power
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-30-2015 05:47 PM  4 years ago
datidun

rrElite Veteran

N Ireland

MyPosts All Forum Topic
The pictures on the few W sites show all white gears.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-30-2015 10:44 PM  4 years ago
dchekas

rrKey Veteran

Farmington, CT

MyPosts All Forum Topic
The brand new kit I built straight off the boat three months ago had the black gears Team Align, Team Futaba, Team Byron Fuels, Team Thunder Power
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-01-2015 10:34 PM  4 years ago
datidun

rrElite Veteran

N Ireland

MyPosts All Forum Topic
Thanx do you happen to know as I was just thinking if one replaces the old gear set with the new back ones,as mine are still the white set,then the front Torque tube gear set would have to be replaced as well as the new black gears look thicker than the old white gears.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-01-2015 11:12 PM  4 years ago
dchekas

rrKey Veteran

Farmington, CT

MyPosts All Forum Topic
The new black gears for the 600N are the same mod (0.6) and tooth count as the previous white gears, and should be interchangeable.

Do not confuse them with the Mod 0.8 gears for the 600E.

These are the P/Ns for the black gears for the 600N:

http://www.alignrcusa.com/index.php...roducts_id=2895

http://www.alignrcusa.com/index.php...roducts_id=2727

http://www.alignrcusa.com/index.php...roducts_id=2894

http://www.alignrcusa.com/index.php...roducts_id=2715
Team Align, Team Futaba, Team Byron Fuels, Team Thunder Power
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-01-2015 11:26 PM  4 years ago
datidun

rrElite Veteran

N Ireland

MyPosts All Forum Topic
Ok thanx for clearing that up,I was confused as on the other topic they are saying to use the newer mod 0.8 front torque tube gear which has to be used with the new black main gear,using the 0.8 torque tube front gear with the older white main and auto gear will not work.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1103 views POST REPLY
Home✈️Aircraft🚁HelicopterAlignT-REX 600N › Align 600N Wiring Pictures
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Thursday, July 18 - 12:14 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online