RunRyder RC
WATCH
 1 page 1627 views Post Reply
Home✈️Aircraft🚁HelicopterGasser Model RC HelicoptersOther › ok guys got involved in another project..need help
06-16-2015 02:59 AM  5 years ago
Topic Vote0Post 1
raptornoob

rrVeteran - shrewsbury. ma. u.s.a. MyPosts All  Forum  Topic

ok guys got involved in another project..need help
thes is a helibug gass trex 600, i have the parts for 700 stretch kit, but where do i start, should there be things to look at as i put back togrther,,,,,should i stretch it, or leave it alone ??
thanks for any help


SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-16-2015 03:32 AM  5 years ago
RM3

rrElite Veteran

Killeen, Texas - USA

MyPosts All Forum Topic
I would stretch that baby to 700... and use rail 696 main blades (they will fit that head)...

the engine has plenty of power for a 700 and will feel lighter than if you left it as a 600.

you just need the boom, torque tube and tail control rod, get longer tail blades too to deal with the additional torque on the main rotor.

BTW whats with the broken spark plug?
showing a preference will only get you into trouble, 90% of everything is crap...
SHARE  PM  EMAIL  Attn:RR  Quote
06-16-2015 03:36 AM  5 years ago
turboomni

rrProfessor

East of the Equator

MyPosts All Forum Topic
What is the main gear ratio?Setup is everything, All my heli's can fly far better than I can pilot them
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-16-2015 12:00 PM  5 years ago
raptornoob

rrVeteran

shrewsbury. ma. u.s.a.

MyPosts All Forum Topic
repairs
i know everyone is asking gear ratio....im dumb how to i figure
the ratio

and last owner said still has lynx clutch rubbing the bell...needs shimming ....does anyone have info from helibug... i cant find how

the plug broke in shipping i quess

...i wanted to check piston,,,but i might have cracked it off...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-16-2015 02:24 PM  5 years ago
OuttaControl

rrVeteran

Springfield, Missouri -United states

MyPosts All Forum Topic
gear ratio
Divide the number of teeth on the maingear by the number of teeth on the pinion. Easy
Mine fall down, went BOOM!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-17-2015 01:58 AM  5 years ago
JuanRodriguez

rrProfessor

The Villages, Florida

MyPosts All Forum Topic
💎Sustaining Member
Money tree ....
I would like to know where you have it planted ???? 😉
Been there, done that and old enough to know better.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-17-2015 11:30 AM  5 years ago
raptornoob

rrVeteran

shrewsbury. ma. u.s.a.

MyPosts All Forum Topic
help
ihelibug says got bad clutchbell setup....but last owner put red locktite on everything....any tips on getting screws out.. i got 2 out and 2 are *&*& and i nee to eturn to helibug
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-17-2015 11:35 AM  5 years ago
raptornoob

rrVeteran

shrewsbury. ma. u.s.a.

MyPosts All Forum Topic
money tree
im a street walker.. lol

ive been selling all my little helis ....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-17-2015 03:47 PM  5 years ago
RM3

rrElite Veteran

Killeen, Texas - USA

MyPosts All Forum Topic
is it really necessary to add so many pictures? 2 or 3 would have been plenty to get a feel for what you had.

as for red loctite... the only way to get that stuff to let go is to use a CA remover or to use heat if its on metal parts that alow you to heat them up to about 300F.

I recommend using a quality HSS tap to clean out the threads, brake cleaner to flush the threaded holes out and use only blue locktite... the only place Red locktite should ever be used is on an engine shaft part that risks unscrewing itself due to torque and other spinning forces.
showing a preference will only get you into trouble, 90% of everything is crap...
SHARE  PM  EMAIL  Attn:RR  Quote
09-18-2015 11:29 PM  5 years ago
raptornoob

rrVeteran

shrewsbury. ma. u.s.a.

MyPosts All Forum Topic
finished and maiden flight

Watch at YouTube

2nd flight....yeah........................BUT!!!
i grabbed the bird not hard enough and pull started and slipped and tipped...
stripped a hitec servo horn on aileron,,,,,,luckily i noticed bird going ko-ko before liftoff.....but all an all a good run

Watch at YouTube

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-19-2015 07:40 PM  5 years ago
fern

rrNovice

Portugal

MyPosts All Forum Topic
nice machine! will keep you in air make your repair time go down!

I have one helibug Trex600 stretched to 700(boom/main blade 690/rear blade 105).
kept same head(metal, 8mm mast), flybar and G270.

happy owner, with peace of availability Trex spare parts...
good luck!
SHARE  PM  EMAIL  Attn:RR  Quote
09-20-2015 03:01 PM  5 years ago
raptornoob

rrVeteran

shrewsbury. ma. u.s.a.

MyPosts All Forum Topic
i did get ???????????spare parts
nice machine! will keep you in air make your repair time go down!
I have one helibug Trex600 stretched to 700(boom/main blade 690/rear blade 105).
kept same head(metal, 8mm mast), flybar and G270.
happy owner, with peace of availability Trex spare parts...
good luck![quote]

i did get 700 tail and all i need to convert except blades

any hints for conversion

gear change..???????

can i put 700 canopy????? some on ebay are 17.99 on sale right now

size of main and tail blade ?????????
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-20-2015 04:16 PM  5 years ago
fern

rrNovice

Portugal

MyPosts All Forum Topic
hi,
helibug have 2 gear ratio not that flexible(5.75 or 6.76), you have to make your choice when you order. My choice was 5.75 and didn't touch that when done the Strecht to 700, my head speed is 1900 and 1950 using GV1-happy with that for sport flying.
main blade is 690 and tail blade 105 - this give me a lot of tail authority. I have tried 710 on main blade didn't like it, feel a bit of load on motor.
about canopy - I kept the 600 because didn't want to go that path, there is some work to do on extra support of 700 canopy.
700 boom - don't recall if I had to do some minor cutting/adjust on 700 boom due the boom support is 600.
go ahead and do it!
have fun
SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1627 views Post Reply
Home✈️Aircraft🚁HelicopterGasser Model RC HelicoptersOther › ok guys got involved in another project..need help
Print TOPIC

 4  Topic Subscribe

Monday, May 10 - 2:47 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online