RunRyder RC
WATCH
 1 page 1306 views POST REPLY
Home✈️Aircraft🚁Helicoptere-MikadoLogo 550 › My New Logo 550 Project
06-04-2015 10:41 AM  4 years ago
Topic Vote0Post 1
BlueGarry1

rrKey Veteran

Romford, Essex, UK

MyPosts All Forum Topic
My New Logo 550 Project
Well it's been a very interesting project but here it is finally.
I started with a stock Logo 550SX kit, but changed the boom and converted it to an SE. I then removed the 5mm bottom counter bearing and refitted a 6mm one so that I could install a Kontronik Pyro 650-103 motor. Next thing was to change the main gear and pinion to M1 size.
Finally I got one of the new tail boom covers from Heli Centre Berlin
(Germany) and fitted that (albeit with a tiny amount of trimming at the end, but no big deal).

Then fitted Heli-Tec Ninja 600mm main blades and 95mm tails.
It needed a little bit of weight in the front of the canopy which was really easy to do and it flies brilliantly.

Electronic set up is: YGE 90LV Esc, Sprit Flybarless System, Opti-Power 6s 5000Mah battery pack. Opti-Power Ultra Guard back up unit.

Happy days

Bluegarry1

Rave ENV Electric Beast X v3 FBL, Rave Ballistic BeastX v3, T-Rex 500 Beast X FBL
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2015 11:14 AM  4 years ago
Ronald Thomas

rrMaster

Gainesville, Fl, USA

MyPosts All Forum Topic
Nice looking setup! The only thing is that ESC is not going to be enough swinging 600mm blades. You need at least a 120 amp continuous and 280 amp burst ESC….Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2015 12:19 PM  4 years ago
BlueGarry1

rrKey Veteran

Romford, Essex, UK

MyPosts All Forum Topic
Actually the 90LV esc is fine and barely gets warm, but I dont 3D as its not my scene.Rave ENV Electric Beast X v3 FBL, Rave Ballistic BeastX v3, T-Rex 500 Beast X FBL
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-04-2015 01:50 PM  4 years ago
Freeskiken

rrApprentice

Edmonton, Alberta, Canada

MyPosts All Forum Topic
Very nice job !! It looks great.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-05-2015 04:57 AM  4 years ago
KC

rrElite Veteran

WA

MyPosts All Forum Topic
looks cool, bet it shows up really good!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2015 11:52 AM  4 years ago
BlueGarry1

rrKey Veteran

Romford, Essex, UK

MyPosts All Forum Topic
Thanks guys. Yes it's really visible in the air and has a lot of presence for a smaller machine.

Bluegarry1
Rave ENV Electric Beast X v3 FBL, Rave Ballistic BeastX v3, T-Rex 500 Beast X FBL
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-05-2015 12:50 PM  4 years ago
GScott

rrElite Veteran

Lewis Center, OH

MyPosts All Forum Topic
I ran 600 blades on mine for awhile with the YGE and didn't have any issues. I seem to recall my amp draw was about the same if not a little less with the 600's. I attributed it to the decreased head speed vs the 550's. It flew awesome with 600's and a single 6s 5000. I may go back to that config next time I need blades.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1306 views POST REPLY
Home✈️Aircraft🚁Helicoptere-MikadoLogo 550 › My New Logo 550 Project
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Wednesday, February 26 - 12:13 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online