RunRyder RC
WATCH
 1 page 1881 views Post Reply
04-01-2015 01:33 PM  6 years ago
Topic Vote0Post 1
doorman

rrProfessor

Sherwood, Arkansas

MyPosts All Forum Topic
💎Sustaining Member
TAGS MINI with Xbus
While getting my machines ready for this up coming season, I finally got around to removing the 7200BX from my 700 sized scale Agusta, and installing a TAGS Mini with a 731bx rx..
This makes the unit a complete DMSS system... Not being sure what to expect, I used the recommended 100% gain settings.. double checked every thing, and headed out to my test pad...(driveway in front of my house!!)
The first lift off was uneventful and the machine felt fine in a hover and moving slowly... but, I thought I might add a bit more gain, just to see how that would work. I increased the elevator to 140% and aileron to 120%.. the next hover was rock solid.. it is the best that this heli has ever flown... smooth, solid and steady... The more that I find out about the new systems, the better I am liking them... I am building a new machine that will be running a 4 blade head with 1050mm blades on it.. and after this experience, I am going to be adding a TAGS unit for my stabilization...
I really like being able to do a complete set up with the unit and my tx rather then a computer... plus it allows you to set your DR/EXPO settings as you would on a FB heli...even the pitch curves are adjustable.. I do have the G-tune cable and have been on line to check it out, but have not had reason to use it... this is my 3rd TAGS install and all are solid flying...

I hope this info might be helpful.... thanks, Stan
(yes I am on TEAM JR and I wanted to see what these units were all about)
AMA 2918-Team Spin Blades,,Castle Creations, Unique Aircraft
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-01-2015 05:25 PM  6 years ago
JEEPWORLD2002/2

rrKey Veteran

Blue Bell, Pa

MyPosts All Forum Topic
Awesome don't hear much about tags mini but I got one for my 380 now just need a head for my 600n n I got a tags 01 for the nitro love the price of the mini wonder if the neo will be priced about the sameTrex600n,Trex500,MR25,MikadoLoGo5003d/KDE,Goblin 380XNova,CastleCreations,Ys,JR XG8,Tags Mini XBus Dmss//FAA# FA3NYC9TAP
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-01-2015 06:19 PM  6 years ago
LaDon

rrVeteran

Fort Dodge .Ia

MyPosts All Forum Topic
Neo being priced the same? Not a chance I am betting the neo will be as high as the silver full size or even more. I hope I am wrong but if I were betting that is where I would thinkTeam Jr
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-01-2015 10:21 PM  6 years ago
JEEPWORLD2002/2

rrKey Veteran

Blue Bell, Pa

MyPosts All Forum Topic
Buy a jr dmss system get two free Rxs
Wish I would have waited to buy my xg8 great deal . Yup gonna run my mini on x bus for 380
Trex600n,Trex500,MR25,MikadoLoGo5003d/KDE,Goblin 380XNova,CastleCreations,Ys,JR XG8,Tags Mini XBus Dmss//FAA# FA3NYC9TAP
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-03-2015 12:12 AM  6 years ago
JEEPWORLD2002/2

rrKey Veteran

Blue Bell, Pa

MyPosts All Forum Topic
Just a heads up jr America's will go up to 30 days on the Rx promotion so if you got your dmss radio with in the last month they will consider it for the promotion fill out the form n send in with your invoiceTrex600n,Trex500,MR25,MikadoLoGo5003d/KDE,Goblin 380XNova,CastleCreations,Ys,JR XG8,Tags Mini XBus Dmss//FAA# FA3NYC9TAP
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-15-2015 01:03 AM  6 years ago
RAK402

rrElite Veteran

Alhambra, CA

MyPosts All Forum Topic
I just set one of these up again, due to changing transmitters.

Setup is quite different than other FBL units I have used, but the performance is outstanding!
Team KBDD/Compass Team Manger/Experience RC/Team JR Americas/WR Field Rep
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-20-2016 12:25 PM  4 years ago
CoachE

rrApprentice

Cincinnati, ohio -usa

MyPosts All Forum Topic
What is the bit rate of a miniTAGS? And does the down loaded soft ware have a phasing setting locked away in there?Team Pilot for Bavarian Demon, AeroPanda, Xpert RC USA
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-20-2016 02:29 PM  4 years ago
doorman

rrProfessor

Sherwood, Arkansas

MyPosts All Forum Topic
💎Sustaining Member
Bit Rate??
Don't have bit rate info, and there is no phasing on this unit..
It is an amazing little unit that can be used on a 90 degree head or a scale head using j type bolts that phase it at 90 degrees..

Stan
AMA 2918-Team Spin Blades,,Castle Creations, Unique Aircraft
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-20-2016 02:57 PM  4 years ago
CoachE

rrApprentice

Cincinnati, ohio -usa

MyPosts All Forum Topic
Thanks stan. I am seriously looking at it for my next scale model. 600 or 700 size airwolf phasing is not a need for this but just good information to know. Laying down plans for a competition model.Team Pilot for Bavarian Demon, AeroPanda, Xpert RC USA
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-21-2016 12:32 AM  4 years ago
doorman

rrProfessor

Sherwood, Arkansas

MyPosts All Forum Topic
💎Sustaining Member
Good Plan
I like it because you do everything with the unit and tx,.. dr, exp, pit curves all in your tx just like a fb machine.. pretty sure you will happy with it...
Stan
AMA 2918-Team Spin Blades,,Castle Creations, Unique Aircraft
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-09-2016 03:46 PM  4 years ago
aashu

rrKey Veteran

scotch plains, NJ

MyPosts All Forum Topic
Helllo
Hi guys

I did not like the old (original ) beastx on the the Alouette I am working on. I am using a JETI radio. Would this unit work on any radio or just meant for JR/Futaba (more popular) brands ?
Garden State, NJ
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-09-2016 04:36 PM  4 years ago
LaDon

rrVeteran

Fort Dodge .Ia

MyPosts All Forum Topic
I do believe it is only going to work with the JR systemTeam Jr
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1881 views Post Reply
Print TOPIC

 5  Topic Subscribe

Wednesday, July 28 - 5:55 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online