RunRyder RC
WATCH
 1 page 2731 views POST REPLY
HomeAircraftHelicopter
e-
SAB
Goblin 380 › goblin 380 pyro Koby 90 help.
03-19-2015 05:22 AM  3 years agoPost 1
GBaker110583

rrNovice

Chandler AZ

My Posts: All  Forum  Topic

I purchased a goblin 380 here off RR and it came with the Koby 90 and the pyro motor. Can someone please tell me which pulley I should use? I'm not a hard core smack 3d. I'm more of a big air kind of flyer at the moment.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-19-2015 10:30 AM  3 years agoPost 2
Huanbui

rrNovice

vietnam

My Posts: All  Forum  Topic

goblin 380 pyro Koby 90 help.
You should run stock motor pulley which is 21T and you will have about 3400 RPM at 80% of throttle

Kontronik suggest to use 20 deg of timing instead of auto timing,but in my G380,after i set 20 deg of timing,i can feel the motor come hotter after the flight!

I think 20 deg of timing should be use when you use the motor pulley bigger then the stock one only!

PM  EMAIL  Attn:RR  Quote
03-19-2015 11:53 AM  3 years agoPost 3
GBaker110583

rrNovice

Chandler AZ

My Posts: All  Forum  Topic

With stock 21t pulley use auto timing then.. I'm coming from castle to Koby here... how do you set the timing.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2015 03:41 AM  3 years agoPost 4
Huanbui

rrNovice

vietnam

My Posts: All  Forum  Topic

goblin 380 pyro Koby 90 help.
Using stick set up :

First,connect the main battery to the esc,after 2s,push the button on the Koby right under the "Drive" word.the esc will go to set up mode.

You should set up to mode 1 and mode 4.you can check here for reference :

Watch at YouTube

this will automatically set up auto timing and some other setting for the esc.

To change auto timing and BEC voltages,you should use pro disc or pro unit.

Hope this help!

PM  EMAIL  Attn:RR  Quote
03-20-2015 05:09 AM  3 years agoPost 5
Anton123

rrApprentice

Canada

My Posts: All  Forum  Topic

Question... Should you do ATV before or after V-Bar setup on a jive?
Thanks

PM  EMAIL  Attn:RR  Quote
03-20-2015 05:15 AM  3 years agoPost 6
Huanbui

rrNovice

vietnam

My Posts: All  Forum  Topic

Normally,i do the esc set up after setting up the FBL unit.

IF you dont use v-bar Gov,you dont need to do calibration your ATV with the V-bar at all.

PM  EMAIL  Attn:RR  Quote
03-20-2015 05:17 AM  3 years agoPost 7
Anton123

rrApprentice

Canada

My Posts: All  Forum  Topic

Perfect, Thanks!

PM  EMAIL  Attn:RR  Quote
03-20-2015 05:36 AM  3 years agoPost 8
GBaker110583

rrNovice

Chandler AZ

My Posts: All  Forum  Topic

Is there a programming link that I can hook up to my computer for set up? Just easier for me to read that way...

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2015 08:07 AM  3 years agoPost 9
Huanbui

rrNovice

vietnam

My Posts: All  Forum  Topic

This video showed you how to use pro unit to set up the esc.

Watch at YouTube

And here the link to download software and FW
http://www.kontronik.com/index.php?...mid=193&lang=en

PM  EMAIL  Attn:RR  Quote
03-20-2015 11:19 AM  3 years agoPost 10
SMANN55

rrApprentice

ramsey,nj

My Posts: All  Forum  Topic

I am the one who sold you the 380, I already set up the koby 90 so you you should not have to do anything. I programed mode 1 and 4, and set the voltage for those servos, I also set up fixed timing like Kontronik advised after the problems they had with that setup.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-20-2015 05:33 PM  3 years agoPost 11
GBaker110583

rrNovice

Chandler AZ

My Posts: All  Forum  Topic

Ok I am new to kontronik esc... how do I program the gov to have set head speeds?

I'm used the castle where you set in motor pack and gearing info and then select desired head speeds.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-21-2015 02:21 AM  3 years agoPost 12
Huanbui

rrNovice

vietnam

My Posts: All  Forum  Topic

You need to reset every thing in your Kontronik esc every time you change motor,change transmitter.

About set HS for Kontronik ESC,simply using Mr,Mel calculation and calculate for HS,motor pulley you need then after set up every thing in your esc.set flat throttle curve in all flight mode to have HS you need for each flight mode regarding to your calculation.

Personally,i never use Mr.Mel calculation but checking in SAB manual for power configuration for the motor pulley needed.

PM  EMAIL  Attn:RR  Quote
09-01-2015 12:02 AM  3 years agoPost 13
EPGuy

rrNovice

UK

My Posts: All  Forum  Topic

Just wondering if many of you guys are using the Koby 90 ESC on your Goblin 380 as mine is cutting out in flight and I'm getting 9 red flashes.

Cheers Edd

PM  EMAIL  Attn:RR  Quote
09-03-2015 12:34 PM  3 years agoPost 14
Dan Minick

rrKey Veteran

Columbus, WI

My Posts: All  Forum  Topic

Are you sure its 9? There is no 9 blink option for when its running. If its 8 blinks you may be geared wrong.
Or maybe its blinking as soon as you plug in the battery? have you tried another?

Team Synergy, Team FBL Rotors-------if its not broke...it will be!

PM  EMAIL  GALLERY  Attn:RR  Quote
09-03-2015 03:11 PM  3 years agoPost 15
jadams

rrKey Veteran

East coast USA

My Posts: All  Forum  Topic

From Kontroniks...
Dear Goblin 380 Owners,

I would like to notify all Goblin 380 owners that there seems to be some problems with the KOBY and the power requirements of the little Goblin.

From reported problems in the USA, I think it is best to use no less than the KOBY 90 on this helicopter. In addition, you should use fixed timing in all power setups. This includes the Micro PYRO 380, Xnova, Scorpion, etc.

We want you to have the most enjoyable time possible with your helicopter, and hope that these recommendations will provide you with the best possible flight experience.

If you experience any problems, all KONTRONIK products are backed by the 30 Day Power Promise which allows you to exchange or return your products directly through your dealer. After the Power Promise period, you may have to return your motor or esc to KONTRONIK for service.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 2731 views POST REPLY
HomeAircraftHelicopter
e-
SAB
Goblin 380 › goblin 380 pyro Koby 90 help.
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Saturday, November 17 - 8:35 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online