RunRyder RC
WATCH
 1 page 528 views POST REPLY
HomeAircraftHelicopterEngines Plugs Mufflers Fuel › Raptor 30 V1
12-19-2003 05:08 AM  14 years agoPost 1
Rob1962

rrApprentice

Long Island N.Y U.S.A.

My Posts: All  Forum  Topic

Why are some clutch bells plain and other V1 have a machined groove on the bell?.

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-19-2003 09:13 PM  14 years agoPost 2
RotorHead486

rrKey Veteran

England

My Posts: All  Forum  Topic

Raptor Clutch Bells
Hey Rob1962,

From my understanding the grooves machined into the clutch bells are to distinguish between V1 and V2 clutch bells.

One groove = Raptor V1
Two Grooves = Raptor V2

If anyone else has any other theories on this please let me know.

Cheers!
Rotorhead486

One Reason For Crashing'Rogue Servo Bent on World Domination'!!
FLP Flight Team

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-20-2003 04:36 AM  14 years agoPost 3
donlynn

rrKey Veteran

New Zealand

My Posts: All  Forum  Topic

Gidday

I understood the single grooved one was a later produced bell set at ~14 thou clearance for a new clutch.

I have both and they were both out !! My later arf v1 came with the smooth bell and a replacemnt bought later had the groove.
Reccomended clearance is 12 thou or 0.3 mm total (0.15 each half)

Regards Don

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 528 views POST REPLY
HomeAircraftHelicopterEngines Plugs Mufflers Fuel › Raptor 30 V1
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Thursday, July 19 - 1:32 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online