RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 774 views POST REPLY
HomeAircraftHelicopterRadio - Mikado VBAR Control System › vbar control + yge 120 hv please help
01-22-2015 04:46 AM  3 years agoPost 1
monsterdog

rrApprentice

mexico city

My Posts: All  Forum  Topic

hi guys know i just buy an yge 120 hv speed controler that i want to use in me avant 90e motor 530 kv but i am confuse in the programing can some help me out to choose the best way to go if is better to use external governor or use vbar governor can some one help me or tell me if you have expirience in this set up can help me out also programing the radio and the speed controler

attelaf luna mexico city

mexico rc

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-22-2015 12:20 PM  3 years agoPost 2
Retired2011

rrElite Veteran

Lee's Summit, MO

My Posts: All  Forum  Topic

Best to use Vbar gov, if you have pro!

I'm not familiar with YGE controller, but there is lots of good info on vstabi.info, and in these videos...

I'm sure Ronald Thomas will be along soon...he is a Vbar/YGE guru!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-22-2015 01:16 PM  3 years agoPost 3
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

If the motor is a Scorpion, follow this video

Watch at YouTube

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-23-2015 04:17 AM  3 years agoPost 4
monsterdog

rrApprentice

mexico city

My Posts: All  Forum  Topic

thanks guys for you help know i set up o ready the esc with the radio but know is only one issue when i turn the speed i get the rigth rpm in high stick and low stick but when the stick is in half way the rpm go down i dont know why can some tell me what can be the ploblem i have set up the vbar governor with the v bar control and also i have wired the sensor i am using the 6.0.6 of the vbar because i am using the vabr control

atte:monsterdog

mexico rc

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-23-2015 11:46 AM  3 years agoPost 5
Retired2011

rrElite Veteran

Lee's Summit, MO

My Posts: All  Forum  Topic

How do you have your throttle curves set?

They should be a straight line, like 60-60-60-60-60 or whatever % relates to the head speed you want to run.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-23-2015 01:08 PM  3 years agoPost 6
Ronald Thomas

rrMaster

Gainesville, Fl, USA

My Posts: All  Forum  Topic

When you are using the VBAR gov, it is adjusting the rpm for the pitch changes. That is why you are seeing the changes in HS. On the bench it will seem strange but in the air it will act appropriately....Ron

Team MikadoUSA 480XXTreme, 550SX, 600SX, 700XXTreme, 800XXTreme!!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-23-2015 08:09 PM  3 years agoPost 7
monsterdog

rrApprentice

mexico city

My Posts: All  Forum  Topic

thanks Ronald for you time andawser i will try and i will tell you
how it goes

attelaf luna

mexico rc

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 774 views POST REPLY
HomeAircraftHelicopterRadio - Mikado VBAR Control System › vbar control + yge 120 hv please help
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Saturday, June 23 - 3:15 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online