RunRyder RC
WATCH
 1 page 539 views POST REPLY
HomeScaleAircraftHelicopterScale Model RC Helicopters › Need help with VBar and 5 blades head
01-21-2015 03:53 AM  3 years agoPost 1
anhquan1

rrVeteran

Marrero,LA USA

My Posts: All  Forum  Topic

I have VBar version 5.3 pro and RCA five blades head (500 size), I finished with the electronic phasing in VBar (one blade over the boom and it's not moving when I give elevator input), but when I spool it up and give forward elevator the Heli moving left and forward as the same time. What's the setting in VBar (Swash) do I have to change. Thanks in advance.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-21-2015 04:34 AM  3 years agoPost 2
Mojave

rrElite Veteran

Palos Verdes, Ca. USA

My Posts: All  Forum  Topic

Which RCA head do you have and what direction does your head spin CW or CCW? If you have the RCA plug-n-play head, it is already phased via the "J" arms. The phase settings are in the swash expert menu.
Barry

All helis and planes have an expiration date stamped on them...you only find it after you crash!!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-21-2015 05:21 AM  3 years agoPost 3
anhquan1

rrVeteran

Marrero,LA USA

My Posts: All  Forum  Topic

This is what I have. (Sorry Can't copy pic from their website)

https://www.scaleflying.com/500-Siz...ead_p_3597.html

The rotor rotate CW.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-21-2015 01:57 PM  3 years agoPost 4
Mojave

rrElite Veteran

Palos Verdes, Ca. USA

My Posts: All  Forum  Topic

It sounds like you need just a tad more phase.

All helis and planes have an expiration date stamped on them...you only find it after you crash!!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-21-2015 09:01 PM  3 years agoPost 5
anhquan1

rrVeteran

Marrero,LA USA

My Posts: All  Forum  Topic

In the VBar or mechanical?

PM  EMAIL  GALLERY  Attn:RR  Quote
01-22-2015 01:15 AM  3 years agoPost 6
Mojave

rrElite Veteran

Palos Verdes, Ca. USA

My Posts: All  Forum  Topic

In the Vbar. There's no need to have any mechanical phasing. Set your control rods as straight up and down as you can get them, then do all of your phasing in the Vbar expert screen. After you adjust the phasing, test fly it and make adjustments as necessary.
Barry

All helis and planes have an expiration date stamped on them...you only find it after you crash!!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-22-2015 01:41 AM  3 years agoPost 7
anhquan1

rrVeteran

Marrero,LA USA

My Posts: All  Forum  Topic

So the blade over the boom is not really apply in this right? Because when I adjust more phasing the blade over the boom start to move.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-22-2015 03:51 AM  3 years agoPost 8
Mojave

rrElite Veteran

Palos Verdes, Ca. USA

My Posts: All  Forum  Topic

No, that test is valid. Sometimes you just need a little more phase. The blade over the boom may wiggle a little bit during the elevator check, but what you don't want to see is a major pitch change. You are rotating the virtual swash to the right correct?
Barry

All helis and planes have an expiration date stamped on them...you only find it after you crash!!

PM  EMAIL  GALLERY  Attn:RR  Quote
01-22-2015 04:02 AM  3 years agoPost 9
anhquan1

rrVeteran

Marrero,LA USA

My Posts: All  Forum  Topic

It's been couple weeks since I touch the Heli, I forgot which direction I move the virtual swash. Let me double check and give it a little more phase and give it a try this weekend. Thank you for your help Barry.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 539 views POST REPLY
HomeScaleAircraftHelicopterScale Model RC Helicopters › Need help with VBar and 5 blades head
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Friday, August 17 - 2:13 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online