RunRyder RC
WATCH
 1 page 943 views POST REPLY
HomeClassifiedAircraftHelicopter
e-
Classifieds - Elec Helicopters
 Sold  BNF Blade 450 3D, 6X LIPOS, Tons of spares
01-06-2015 12:33 AM  3 years agoPost 1
CNCPRO

rrNovice

IDAHO

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

Up for sale Is my BNF Blade 450 3D. Has the 450H motor with 12T Align steel pinion, Spartan Quark Gyro and Maverick E-Series main blades. Included are the following Items. Lots of hardware, shims, bushings, screws, etc. Two fusuno canopies. One like new with only a handful of flights, trimmed a little to fit the 450H. One with some runway rash. One never used stock canopy. One complete spare head assembly. A used main tail gear with one way sleeve, shim and jesus bolt. 1 set of used wood blades which are fine and were removed when I switched to better blades. One set of used flybar paddles. One set of stock tailfins. One main gear hub with one way bearing. One G210 gyro which works fine and was removed to switch to the Quark. 6X Glacier 3S 2200MAH 35C Lipos with only around 10 to 12 flights on them. Always taken care of. Broke In properly and always stored at storage voltage. I’m getting 4 min. flights with this setup and coming down with packs at 3.78 volts. So you should be able to bump that up to 4.5 min. flights easily If you wanted to. The parts listed below are all brand new. Either still In the package or removed and put Into the organizer pictured, but brand new and never used. There Is enough parts here to keep It flying for a long time to come.

(1) LYNX LANDING GEAR AND SKID SET $20.00
(2) ALIGN 11T STEEL PINIONS $6.00
(1) ALIGN 12T STEEL PINION $3.00
(8) BLH1617 MAIN BLADE GRIP $19.88
(27) BLH1621 SPINDLE FEATHERING SHAFT $50.22
(12) TAIL BLADE GRIPS $22.32
(1) BLH1612 TAIL ROTOR THRUST BEARING SET $4.97
(2) BLH1624 FLYBAR PADDLE CONTROL FRAME $11.18
(1) BLH1632 WASHOUT CONTROL ARM LINK SET $4.40
(1) BLH1638 LINKAGE SET $3.72
(19) BLH1647 MAIN SHAFT $94.72
(14) BLH1651 MAIN GEAR $48.79
(1) BLH1653 MAIN TAIL GEAR $2.27
(6) BLH1657 TAIL BOOMS $16.77
(2) BLH1659 TAIL LINKAGE PUSHROD $3.72
(1) BLH1658 TAIL SERVO BOOM MOUNT SET $3.40
(2) BLH1660 TAIL PUSHROD GUIDE SET $7.44
(1) BLH1661 TAIL BOOM SUPPORT $2.20
(4) BLH1663 TAIL CASE SET $14.88
(2) BLH1665 TAIL ROTOR SHAFTS $3.72
(3) BLH1667 TAIL PITCH LEVER $11.16
(3) BLH1668 TAIL PITCH SLIDER $13.20
(1) BLH1669 TAIL ROTOR HUB $3.18
(1) BLH1671 TAIL ROTOR BLADE SET $3.22
(2) BLH1671B TAIL ROTOR BLADE SET BLACK $6.40
(1) BLH1673 COMPLETE HARDWARE SET $10.22
(1) BLH1679 CANOPY MOUNT SET $2.55
(1) EFLH1649 ONE WAY BEARING SHAFT AND SHIM $3.58
(1) BLH1604 FLYBAR CONTROL LINK SET $3.06
(1) BLH1633 SWASHPLATE $11.73
(18) BLH1625 FLYBAR ROD $38.88
(9) BL1623 FLYBAR SEESAW $22.95
(1) BLH1631 WASHOUT CONTROL ARM LINKAGE SET $12.66
(19) BLH1618 BELL MIXER ARM AND LINKAGE SET $41.80
(19) BLH1637 BALL LINK SET $3.72
(3) BLH1655 TAIL DRIVE GEAR PULLEY ASSM. $13.20
(4) BLH1656 TAIL BELT $17.60
(1) EFLA335H 35 AMP ESC $38.00.
(17) BLH1602 HEAD DAMPENER $13.60
(4) BLH1608 HEAD DAMPENER $3.20
(3) BLH 1615 WOOD MAIN BLADE SETS $28.11
(3) MAVERICK E-SERIES MAIN BLADE SETS $30.00
(1) BLH1620 MAIN GRIP THRUST BEARING SET $4.97
(1) BLH1628C CF FLYBAR PADDLE SET $15.99
(1) BLH1671C CF TAIL ROTOR BLADE SET $15.99
(6) BLH1666 PADDLE CONTROL FRAME BEARING $8.95
(2) BLH1605 MAIN BLADE GRIP BEARING $3.48
(3) LANDING GEAR STRUT SETS $10.92
(4) LANDING GEAR SKID SETS $14.56
(1) BLH1676A ALUM. SERVO ARM SET $5.99
(1) BLH1630A ALUM. WASHOUT BASE $7.49
(1) BLH1634A ALUM. ANTI ROTATE BRACKET $9.99
(1) EFLH1465A ALUM. TAIL ROTOR DRIVE $5.63
(1) BLH1662A ALUM. TAIL FIN MOUNT $8.99
(1) BLH1679A ALUMINUM CANOPY MOUNTS $7.49
(1) BLH1658A ALUM. TAIL SERVO MOUNT $8.99
(1) BLH1616 MAIN BLADE GRIP BOLT SET $3.20
(2) KBDD 59.6MM TAIL BLADE SETS $8.00
(1) KBDD PRO 61MM TAIL BLADE SET $4.00
(1) BLH1681 CANOPY $12.00

I priced almost everything from hop me up which Is one of the cheapest places I know to get parts.
New spares alone add up to over $800. PM me with questions or requests for more pics. At this time I don’t want
to split up the package. But that may change depending on how much Interest I get.

Asking $525 OBO.

PM  EMAIL  Attn:RR  Quote
01-17-2015 01:14 AM  3 years agoPost 2
CNCPRO

rrNovice

IDAHO

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

TTT

PM  EMAIL  Attn:RR  Quote
02-16-2015 02:07 AM  3 years agoPost 3
Big Daddies Heli's

rrApprentice

Parts Unknown to the X Wife :)

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

B-450
I'm seein your not getting too many hits
How much for the Kopter & a couple lipo's shipped to upstate NY

No answer ?
found one elseware 2/24/15

They Call Me Big Daddy

PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2015 05:09 PM  3 years agoPost 4
hnhelicopter

rrNovice

Ha noi, hai Ba Trung,Vietnam 16 lane 53 Cam Hoi st

My Posts: All  Forum  Topic

My Classified Activity
My Classified Feedback
Add Classified Feedback

blade 450
What the hell ! So many parts. Up for good heli and tons of part

PM  EMAIL  HOMEPAGE  Attn:RR  Quote
WATCH
 1 page 943 views POST REPLY
HomeClassifiedAircraftHelicopter
e-
Classifieds - Elec Helicopters
 Sold  BNF Blade 450 3D, 6X LIPOS, Tons of spares
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Classifieds › HELP-FAQ
Attention Buyers! To receive feedback Post Reply in the seller’s topic. The seller can then click your post's Add Classified Feedback link.
Attention Sellers! Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process (and not replied to) will be removed upon request. Click Attn:RR on the offending classified post. Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Wednesday, November 14 - 3:14 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online