RunRyder RC
WATCH
 1 page 1377 views POST REPLY
Home✈️AircraftMulti-Rotore-Multi-Rotor Main DiscussionDJI › Dji inspire 1 .. what's wrong with the 1st batch?
12-22-2014 09:05 PM  5 years ago
Topic Vote0Post 1
heliVoY

rrVeteran

NJ

MyPosts All Forum Topic
Dji inspire 1 .. what's wrong with the 1st batch?
http://www.newsshooter.com/2014/11/...be-pushed-back/

Anyone have more insight as to what was wrong with them? I have one on preorder however am thinking of waiting ... they are not shipping until January now anyway ..

Voy
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-23-2014 12:10 AM  5 years ago
wrongler

rrProfessor

Brewerton, New York

MyPosts All Forum Topic
Generally speaking when the first batch of most new products come out there are problems. I have learned over the years to wait until they are a little better proven.Bill Whittaker
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-25-2014 12:16 AM  5 years ago
eddiscus

rrElite Veteran

Dumont, NJ-USA

MyPosts All Forum Topic
They probably decided to do a firmware update before shipping the pre-orders and now none of them work. Logo Xxtreme 800
Logo 700
Citizen 142
Synergy 766
TDR 2
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-25-2014 02:24 PM  5 years ago
bradbranch

rrNovice

bradbranch@msn.com

MyPosts All Forum Topic
Or just maybe the retailers said "hey wait, we have 100's of your Visions 2+ in stock for Christmas that need to be sold." Going price now $1099 with a extra battery
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-26-2014 06:26 AM  5 years ago
heliVoY

rrVeteran

NJ

MyPosts All Forum Topic
I canceled my order as i have hear/read that already there is a 2nd version of the Inspire in on the tail of the pre-ordered versions. Several sources claiming this, and with DJIs history, this will be on par with other releases, and maybe even lowered pricing. I know a lot of guys are canceling/deferring their orders.

So far its mostly camera issues that are being resolved, some software problems, and there are also structural updates in the works.

Voy
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-26-2014 07:59 AM  5 years ago
XRHRD

rrApprentice

Honolulu, Hawaii

MyPosts All Forum Topic
most likely the issue is with the landing gear/servo binding. some one had miss read the measurement and had to do some cutting so that there is no binding. that's the issue and hold from being delivered to the dealers. Only a few prototype had been sent out to dealersHeads up, it's my turn to crash & burn , NOT EVEN
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-26-2014 01:08 PM  5 years ago
wrongler

rrProfessor

Brewerton, New York

MyPosts All Forum Topic
It does pay to wait!Bill Whittaker
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-26-2014 02:36 PM  5 years ago
rcflyerheli

rrKey Veteran

Granbury, TX USA

MyPosts All Forum Topic
Where have I heard this stuff before? They did the same stuff with the S1000 and the Lightbridge, and even after we got it, we couldn't use it as they designed it around some gimbal that they had never mentioned in their pre release advertising, and we were stuck waiting for months with a unit that there was no way to power up because of lack of a single cable.

The experience with the S800 and then the S1000 is why I'm done with DJI.
Logo 700, Specter 700, Goblin 700, Trex 700DFC, Gaui X7, Logo 690SX, Logo 600SX; Trex 470 Trex 500
Amain Team Rep
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-15-2015 02:41 PM  5 years ago
heliVoY

rrVeteran

NJ

MyPosts All Forum Topic
We have found out the cause of these cases.
Not a pilot error. It is a bug relative to the IMU.
We will release a safety guide on this.
In general, check the IMU data which the MOD of the accelerometer should be about 1.00 with 0.01 tolerance. Otherwise calibration needed.

New firmware is under testing and will be released soon to fix the bug.
Sorry for that.
this is what is coming out of DJI on the inspire 1 ... im glad i did not buy it yet ... or ever .. Ill just get back to finishing my tarot 960 ... back to soldering ! lol

Voy
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 1377 views POST REPLY
Home✈️AircraftMulti-Rotore-Multi-Rotor Main DiscussionDJI › Dji inspire 1 .. what's wrong with the 1st batch?
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Friday, April 10 - 12:57 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online