RunRyder RC
 1  Topic Subscribe
WATCH
 1 page 583 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › futaba 750 gyro sensor location
11-15-2014 07:31 PM  3 years agoPost 1
FenderBean

rrElite Veteran

Fort Hood TX

My Posts: All  Forum  Topic

I Have A Avant Mistro Nitro And The Default Gyro Location Is Not On The Center Line Of The Heli Axis, Will This Effect Roll Function?
I Would Think not Since The Gyro Senor Never Sits Under The Rotor Anyway

https://www.youtube.com/channel/UCE_rywpdgBAxA8bHVCw3VQQ

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-15-2014 09:16 PM  3 years agoPost 2
don s

rrElite Veteran

Chesapeake, VA

My Posts: All  Forum  Topic

As long as the sensor is square with all three axes and the wire exits the front or back it shouldn't matter.

Why the caps on every word?

E820, Raptor G4N, X50F/E, E620, Forza 450, and some planks.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-16-2014 07:52 PM  3 years agoPost 3
FenderBean

rrElite Veteran

Fort Hood TX

My Posts: All  Forum  Topic

For Some Reason When I Use MyPhone To Post Now It Does This. Tried To Fix It No Luck And It's Just This Site And Rcu That Do it.

https://www.youtube.com/channel/UCE_rywpdgBAxA8bHVCw3VQQ

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-17-2014 01:27 AM  3 years agoPost 4
don s

rrElite Veteran

Chesapeake, VA

My Posts: All  Forum  Topic

Cool.

E820, Raptor G4N, X50F/E, E620, Forza 450, and some planks.

PM  EMAIL  GALLERY  Attn:RR  Quote
11-17-2014 01:50 AM  3 years agoPost 5
rexxigpilot

rrProfessor

Florida

My Posts: All  Forum  Topic

The CGY750 uses Silicon Sensor's Pinpoint vibrating ring gyros (same ones as full size V-Bar). Having a ring shape for the vibrating portion and multiple sensors around the circumference of the ring, the gyros are very unaffected by vibration and centrifugal force that is created by mounting it off center. You should not even notice any difference.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-16-2014 08:17 AM  3 years agoPost 6
RM3

rrElite Veteran

Killeen, Texas - USA

My Posts: All  Forum  Topic

didnt Nick Maxwell or Bobby Watts explain that the sensor had to be mounted in the center line of the roll axis or you would end up with a cork screw effect? Ther was a vid somewhere that one of them said this, some sort of E-fest indoor video...

showing a preference will only get you into trouble, 90% of everything is crap...

PM  EMAIL  GALLERY  Attn:RR  Quote
12-16-2014 01:15 PM  3 years agoPost 7
FenderBean

rrElite Veteran

Fort Hood TX

My Posts: All  Forum  Topic

You would think if the effects it then not having it directly under the main shafts would cause issues

https://www.youtube.com/channel/UCE_rywpdgBAxA8bHVCw3VQQ

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-16-2014 02:16 PM  3 years agoPost 8
don s

rrElite Veteran

Chesapeake, VA

My Posts: All  Forum  Topic

The gyro only cares about angular acceleration right(?), which on a rigid frame is the same everywhere.

E820, Raptor G4N, X50F/E, E620, Forza 450, and some planks.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-17-2014 01:09 PM  3 years agoPost 9
Dr.Ben

rrMaster

Richmond, VA, USA

My Posts: All  Forum  Topic

The only things that matter to sensor location are that it's dead nuts square to the long axis of the model and in a rigid, low vibration area. It does not have to be close to the mainshaft or on the centerline of the model.

Ben Minor

Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 583 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › futaba 750 gyro sensor location
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, June 19 - 11:53 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online