I have been down with Bell this weekend, setting up the new Pred, when coming to set up the tx via Learn RC, the usual 3 points were there, but there is a new setting,which gives you the choice of 3 pre set throttle curves for flying..
I set linear but I found when I pressed the + it changed to one of the other curves, I don't want curves on the fadec I set them on the TX, so what I did was scroll through to Linear and left it at that.
I flew on the same linear curve on my tx to check the fadec curve was working, it was, but extremely laggy, as it was 0,25,50,75,100 on fadec.
My question is I want to set a proper curve on the tx, if I do this will it conflict with the pre set curve on fadec ?
unsure of why gapser has done this it makes something simple now very complicated... there is no need for a pre set set of curves on fadec.its only good for planks
All The Best