RunRyder RC
WATCH
 1 page 1894 views POST REPLY
HomeAircraftHelicopterAerial Photography and Video Sell  (2) Cinestar 8 Octos with 3-axis gimbals for sale
08-22-2014 06:50 PM  3 years agoPost 1
i-fly-aerials

rrApprentice

Arizona, USA

My Posts: All  Forum  Topic

Selling my two CS8 systems, both were built to be identical, redundant systems. They have served me well, and its time to move on. Planning on selling separately, but if a buyer wants a full setup with two systems, I'll make a good deal. Here is more info:

**Both copters have identical equipment, except where otherwise noted**

Cinestar 8 Frame with 450mm booms and QC3328 motors
· Freefly 3 Axis Gimbal
· 3 Freefly Radians for tilt/roll/pan gimbal control
· APC 14x4.7 props
· Full set of Mikrokopter Electronics (Copter two has OSD board as well)
MK flight control
- FPV on copter for pilot reference (see Notes at bottom)
MK flight control
MK Navigation board
MK Power Distribution Board
MK GPS with Waypoint Flying
· GR16 receiver
· If both copters are sold to same buyer, will include Graupner MX-20 HOTT flight control
· Red LED lights on boom 1 and three green LED lights on booms 4, 5, and 6.

BATTERIES
Each copter will come with 6 flight packs (Zippy 6s 5000 mAh)
Each copter will come with 2 gimbal batteries (Zippy 3s 1200 mAh or Quadrocopter 3S 1200 mAh)
No chargers included

SPARE PARTS AND TOOLS
· PC interface cables for use with MK Tools and Radian software
· Listing of all parameters as set within software (very helpful !!)
· Vibration dampener rings (several sets for different camera weights)
· Spare hardware (screws, nuts, bolts, clamps, wheels, stand-offs, etc.)
· Extra APC 14 x 4.7 propellers
· Landing gear extenders
· 2 extra gimbal booms
· Hex drivers, screwdrivers, wire cutters, tape, etc.
· 3 spare QC3328 motors (if bought together...otherwise will give one each, can be talked into two!)
· Miscellaneous wires, cables, etc.

PLEASE NOTE:

Copter two has the larger gimbal...this means is has sliders to fit a larger camera body. This doesn't mean the copter is rated to lift additional weight, but if flying a GH4 or 5D, the camera has more room in the gimbal. Keep in mind, copter one has a gimbal totally sufficient to hold these cameras as well...its just not as roomy as copter 2.

Both copters are in perfect flying condition. I'm happy to FaceTime serious buyers to show them the copter and any specific areas of interest, as well as test fly on camera...

Both copters have FPV cameras setup on boom 1. Copter One has a 900mHz Tx and copter two has 5.8 Tx. Both copters work great, and will come with the matching FPV Rx.

***Neither copter comes with:
HDMI converter or cables for the gimbal video feed
Gimbal video Tx or Rx
Gimbal radio

If you price all this equipment out, it comes to well over $20,000. I am willing to part with each copter for $6,000. Will sell both for $12k and it will include Graupner MX-20, as well as lots of other accessories I can't really split up.

Please call, text, or email with specific questions, concerns, or offers. Thanks all. Oh, and both copters are located in New Orleans.

Michael - (eight-1-8)three98-six7nine1

PM  EMAIL  GALLERY  Attn:RR  Quote
03-24-2015 07:59 AM  3 years agoPost 2
i-fly-aerials

rrApprentice

Arizona, USA

My Posts: All  Forum  Topic

MAJOR price drop...
$4,000 per RTF Cinestar 8...

PM  EMAIL  GALLERY  Attn:RR  Quote
09-28-2015 03:30 PM  35 months agoPost 3
daymon

rrNovice

Denton

My Posts: All  Forum  Topic

Do you still have?
very interested!

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1894 views POST REPLY
HomeAircraftHelicopterAerial Photography and Video Sell  (2) Cinestar 8 Octos with 3-axis gimbals for sale
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Saturday, August 18 - 3:41 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online