RunRyder RC
WATCH
 1 page 1039 views POST REPLY
Home✈️Aircraft🚁HelicopterGaui NX4 NX7Gaui NX4 › Switch placement
07-07-2014 01:14 AM  6 years ago
Topic Vote0Post 1
michael88997

rrElite Veteran

Lewisville,Tx

MyPosts All Forum Topic
Switch placement
Where r y'all putting the glow switch and power switch so it can be reached under the canopy? I don't want to cut a hole cause it will let more oil into the front
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-07-2014 03:11 AM  6 years ago
07sb

rrNovice

Thompson, Iowa USA

MyPosts All Forum Topic
michael88997
I struggled with placement of these items when I built my NX4....

I put my power switch along the top edge of the right side frame (outboard side). I can reach the switch through the top opening in the canopy. Just attached it with some 3M outdoor mounting tape and a zip tie.
I put my glow switch on the right side frame, just above the land skid. It's just barely visible and reach-able behind the canopy there. Attached with mounting tape also.

TimO
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-07-2014 03:17 AM  6 years ago
S76 Mech

rrElite Veteran

Hatboro, Pa.

MyPosts All Forum Topic
Cut a hole, you won't get any oil in there, the exhaust is o the other side. Zero issues with mine.

Gaui Greatness X7, X5, NX4, X3
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-09-2014 03:11 PM  6 years ago
michael88997

rrElite Veteran

Lewisville,Tx

MyPosts All Forum Topic
Thanks guys.. I ended up taking some foam tape and putting the switch on the outside of the frame close to the starter and the glow is on the fan shroud... both can be reached now with canopy on and without drilling a hole
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1039 views POST REPLY
Home✈️Aircraft🚁HelicopterGaui NX4 NX7Gaui NX4 › Switch placement
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, August 6 - 1:30 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online