RunRyder RC
WATCH
 1 page 908 views POST REPLY
07-02-2014 12:52 AM  6 years ago
Topic Vote0Post 1
wc_wickedclown (RIP)

rrProfessor

long beach calif

MyPosts All Forum Topic
beastx issue help!!
maybe i need to try a separate rx pack ?
6s trex 600

Watch at YouTube

Insha Allah made in america
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-02-2014 02:16 AM  6 years ago
goof2

rrApprentice

Bristol,CT

MyPosts All Forum Topic
What receiver and how are you powering it?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-02-2014 05:25 PM  6 years ago
kamaroman540

rrApprentice

Maple Shade N.J

MyPosts All Forum Topic
Brown out
The bec or battery pack-not the flight pack-is to weak to run the radio and its shutting down-hence the brown out.Try a new bec or esc with bec
LOGO600SX LOGO400SE
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-02-2014 08:31 PM  6 years ago
wc_wickedclown (RIP)

rrProfessor

long beach calif

MyPosts All Forum Topic
goof2
What receiver and how are you powering it?
dsmx rx and sat dsmx
kamaroman540
Brown out
The bec or battery pack-not the flight pack-is to weak to run the radio and its shutting down-hence the brown out.Try a new bec or esc with bec
thank you
Insha Allah made in america
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-07-2014 10:16 PM  6 years ago
kamaroman540

rrApprentice

Maple Shade N.J

MyPosts All Forum Topic
Whats up
How did u make out with the 600??
LOGO600SX LOGO400SE
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-08-2014 03:05 AM  6 years ago
wc_wickedclown (RIP)

rrProfessor

long beach calif

MyPosts All Forum Topic
kamaroman540
Whats up
How did u make out with the 600??
Plugged a 4.8v AAAA Battery into the bind port

Watch at YouTube

Insha Allah made in america
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-11-2014 02:22 PM  6 years ago
Richardmid1

rrProfessor

Leeds, England

MyPosts All Forum Topic
There should also be 2 power input leads to the RX (600 size and above) to share the load as a single servo connector is only good for around 3 amps.60% of the time, it works every time!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-11-2014 05:11 PM  6 years ago
wc_wickedclown (RIP)

rrProfessor

long beach calif

MyPosts All Forum Topic

There should also be 2 power input leads to the RX (600 size and above) to share the load as a single servo connector is only good for around 3 amps.
its not recommended and tho i ran a 4.8v batt to the rx with the built in bec power

can you burn up a esc this way ?

if the esc bec is putting out 5v and i add 4.8v id think no damage
would occur.?

am i right or wrong pz and ty
Insha Allah made in america
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 908 views POST REPLY
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, August 11 - 1:55 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online