RunRyder RC
WATCH
 1 page 1687 views POST REPLY
Home✈️Aircraft🚁Helicoptere-AlignT-REX 150 › DFC 150 expert on tail wag.
06-30-2014 10:05 PM  6 years ago
Topic Vote0Post 1
DavidIsip

rrApprentice

Fairfield, Vallejo, Martinez or Concord Ca

MyPosts All Forum Topic
DFC 150 expert on tail wag.
I've tried every possible setting on the tail but fur some reason, I could not get the tail to stop wagging. What other things am I missing? Do the expert know if the problem is the board itself? Please help. BtW, 'm using a JR 9503 transmitter so I tried all 3 settings; INH, Rud and Auto
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-01-2014 02:07 AM  6 years ago
Herbie T

rrNovice

Fairfield Ca USA

MyPosts All Forum Topic
Put gyro gain on gear channel in travel adjust. I run it at 72% on a 9503 radio at 100% throttle.On windy days in dead hover I get a slight wag.But when flying moving no wag at all.
SHARE  PM  EMAIL  Attn:RR  Quote
07-01-2014 03:08 AM  6 years ago
DavidIsip

rrApprentice

Fairfield, Vallejo, Martinez or Concord Ca

MyPosts All Forum Topic
I figured it out. All I did is went to travel adjust on the gear and changed from +100 & -100 to +60 & -60. Thanks to everyone and special thanks to DemetriusUSN. Now I can figure 8 inside the family room with no tail wag at 60% TC flat.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1687 views POST REPLY
Home✈️Aircraft🚁Helicoptere-AlignT-REX 150 › DFC 150 expert on tail wag.
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Sunday, August 9 - 2:28 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online