WATCH |
1 page 661 views | Post Reply |
RunRyder | RunRyder |
![]() |
![]() |
![]() rrNovice Apple Creek, OH |
3GX and DSMx sats won't rebind after upgrade to 5.0 Can somebody tell me what I am doing wrong? I have a 700e DFC that was running 4.0. I decided to upgrade to 5.0 to see if that would help some of the issues that I was having. Only have two 4 flights on it. I am using a DX9 and two DSMx sats. It was bound just fine using 4.0, but after I upgraded to 5.0, I no longer can get the TX to bind. Here is how I am doing it.
Inserted bind plug into lower horizontal receptacle. Held down the button on top of the 3GX and powered on the heli. Sats lights were flashing and the 3GX lights were on steady. Pushed the bind button on the transmitter and turned it on. All I get is bind failed. Made sure the frame rate was set to 22ms and DSMx. I have tried several times, from different distances, different settings on the TX like 0 throttle, everything I can think of, I have tried. Any help would be appreciated. Thanks |
SHARE PM EMAIL GALLERY Attn:RR Quote |
![]() rrVeteran Galesburg, Michigan USA |
I was able to get it to bind after replacing one of the satellites (it was an older satellite, and it was on antenna port 2) Check your sat cables, especially antenna port 2, the 3gx doesn't like to bind without a satellite plugged into port 2. Mike Funky Chicken?!!..........I thought this was how you do a piro flip!! |
SHARE PM EMAIL GALLERY Attn:RR Quote |
WATCH |
1 page 661 views | Post Reply |
RunRyder | RunRyder |
![]() |
![]() |
Friday, February 26 - 3:21 pm - Copyright © 2000-2021 RunRyder EMAIL • Enable Cookies