RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 1428 views POST REPLY
HomeAircraftHelicopterRadio - Spektrum DSM › Programming the timer on the DX9
06-26-2014 06:43 AM  3 years agoPost 1
ticedoff8

rrKey Veteran

Morgan Hill, CA. USA

My Posts: All  Forum  Topic

This is driving me nuts.
Simple: I want the timer on the DX9 to work the same way it works on the DX7.

I set the timer on the DX7 to count down from 6:30.
It only starts when I press the "increase" or "adjust" button.
It stops if I press either of those buttons again.
It starts to beep at 1 second intervals when it gets to 10 seconds remaining.
If I press the "clear" button, it goes back to 6:30 and waits for me to press one of those buttons to start it again.
When I power up the radio, the clock is at 6:30, waiting for me to press one of these buttons.

I don't need fancy.
I don't need it to start counting when I advance the collective.
I don't need to to slave to the flight mode switch.

Is this simple task even possible?
If you think it is, please provide a step by step example.
The "manual" is useless.

Believe 1/2 of what you see and none of what you hear.
Fake News will be the downfall of our Republic!

PM  EMAIL  GALLERY  Attn:RR  Quote
06-26-2014 06:15 PM  3 years agoPost 2
BarracudaHockey

rrMaster

Jacksonville FL

My Posts: All  Forum  Topic

Simple
Go to TIMER
Set the Time
Set START to Thr Stick
Over %25 is fine, but whatever works for you, when you cross that the timer will start
Set One Time to ACTIVE and it wont stop the timer every time you bring down the stick, it will simply start with the throttle and run till it counts down and you hit CLEAR to reset it

Andy
AMA 77227
http://www.jaxrc.com

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1428 views POST REPLY
HomeAircraftHelicopterRadio - Spektrum DSM › Programming the timer on the DX9
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, June 24 - 9:50 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online