RunRyder RC
WATCH
 1 page 959 views POST REPLY
HomeAircraftHelicopterRadio - Mikado VBAR Control System › Arming the CC phoenix edge speed controller.
06-22-2014 05:30 AM  4 years agoPost 1
kobe1kobe

rrNovice

smyrna, tennessee, u.s.a

My Posts: All  Forum  Topic

Need help on arming the cc phoenix edge speed controller on the Vbar control.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-22-2014 05:35 AM  4 years agoPost 2
soberflierross

rrApprentice

Cottage Grove, MN USA

My Posts: All  Forum  Topic

Motor has to be in off position, won't arm in idle

PM  EMAIL  GALLERY  Attn:RR  Quote
06-22-2014 06:04 AM  4 years agoPost 3
kobe1kobe

rrNovice

smyrna, tennessee, u.s.a

My Posts: All  Forum  Topic

Anyone?

PM  EMAIL  GALLERY  Attn:RR  Quote
06-23-2014 02:09 AM  4 years agoPost 4
kobe1kobe

rrNovice

smyrna, tennessee, u.s.a

My Posts: All  Forum  Topic

I figured it out ...Go to Governor Mode under Governor, then load up external governor,exit.. then go to esc endpoints click on it ,,next click on esc setup ok and continue it will give you a High limit- Full Speed and Lower Limit- Motor off. Push your collective all the way up and lower the endpoints
then bump it up the end points until you hear a confirmed sound. Do the same with the Lower limit-motor off. This should arm your throttle... Go back to your esc output--set 30 for bank1, 70 for bank 2 and 100 for bank 3.....You are good to go.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-23-2014 02:22 AM  4 years agoPost 5
tyfast27

rrApprentice

Dubois, Wyoming

My Posts: All  Forum  Topic

Nice

PM  EMAIL  GALLERY  Attn:RR  Quote
09-06-2014 10:56 PM  3 years agoPost 6
rcflyerheli

rrKey Veteran

Granbury, TX USA

My Posts: All  Forum  Topic

Go back to your esc output--set 30 for bank1, 70 for bank 2 and 100 for bank 3.....
My setup required a value of 0 for bank 1. Aparently the V Control doesn't give the same value output as what the Spektrum throttle curves did.

Goblin 700, Trex 700DFC, Gaui X7, Logo 690SX, Logo 600SX; Trex 470 Trex 500
Amain Team Rep

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 959 views POST REPLY
HomeAircraftHelicopterRadio - Mikado VBAR Control System › Arming the CC phoenix edge speed controller.
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Saturday, August 18 - 3:41 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online