RunRyder RC
WATCH
 1 page 1284 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsV-Bar › Vbar Blue line nitro gov with align sensor?
06-18-2014 07:46 PM  4 years agoPost 1
automagp68

rrNovice

Colorado

My Posts: All  Forum  Topic

Has anyone got this working? Its old tech so i assume there is a thread on it somewhere. Can someone send me a link to a thread where this is discussed?

Im hoping to use the align gov sensor with the magnets on the vbar blue line gov

Does the blue line use a servo connector for the gov or a micro JST
I just ordered it and don't have it yet.

Any inför much appreciated

PM  EMAIL  Attn:RR  Quote
06-18-2014 08:11 PM  4 years agoPost 2
WessCo

rrApprentice

Summerville, GA USA

My Posts: All  Forum  Topic

It uses a servo connector. The Align sensor will work.

MikadoUSA
VTeam
OptipowerUSA

PM  EMAIL  GALLERY  Attn:RR  Quote
06-18-2014 08:15 PM  4 years agoPost 3
automagp68

rrNovice

Colorado

My Posts: All  Forum  Topic

Sp just stick a servo end on the sensor and plug her in and it should be good to go?

I got a line on a used blue line

Is it worth it to get the silver line?

I have always had minis before. Never had a full-size

PM  EMAIL  Attn:RR  Quote
06-18-2014 08:16 PM  4 years agoPost 4
bkervaski

rrElite Veteran

Birmingham, AL, USA

My Posts: All  Forum  Topic

Is it worth it to get the silver line?
On a nitro, definitely.

Team Synergy Factory Specialist / Scorpion / Thunder Power / Byron's Fuels

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-18-2014 09:38 PM  4 years agoPost 5
Gary H

rrVeteran

Minnesota USA

My Posts: All  Forum  Topic

Yes , why would you not?

GH

PM  EMAIL  GALLERY  Attn:RR  Quote
06-18-2014 10:42 PM  4 years agoPost 6
automagp68

rrNovice

Colorado

My Posts: All  Forum  Topic

Why would i not what?

Get a silverline? Because its $350 and i can get a blue for $200
lol

I love the mini I've had plenty of those, to bad it won't work on a nitro

PM  EMAIL  Attn:RR  Quote
06-18-2014 10:46 PM  4 years agoPost 7
sharam

rrElite Veteran

Northern California - Fly at Morgan Hill Field

My Posts: All  Forum  Topic

I have a blue Vbar and it works fine on my Trex 700 OS105.

Verba volant, scripta manet

PM  EMAIL  GALLERY  Attn:RR  Quote
06-18-2014 11:42 PM  4 years agoPost 8
bkervaski

rrElite Veteran

Birmingham, AL, USA

My Posts: All  Forum  Topic

The silver sensor handles vibrations considerably better than the blue sensor, there is a big difference.

If it was electric, blue is fine but for nitro save yourself some hassle and get the silver.

The silver sensor just hard mounts, the blue sensor requires a metal plate with foam tape to help with dampening vibrations and if you have excessive vibrations you end up doing things like the "Milton" mod to overcome them.

With the silver sensor you can really crank the gains up so the heli feels more locked in on both electric and nitros.

Team Synergy Factory Specialist / Scorpion / Thunder Power / Byron's Fuels

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-19-2014 12:04 AM  4 years agoPost 9
automagp68

rrNovice

Colorado

My Posts: All  Forum  Topic

Thanks for the input!

PM  EMAIL  Attn:RR  Quote
06-19-2014 12:39 AM  4 years agoPost 10
Ghostrider

rrElite Veteran

San Diego, CA

My Posts: All  Forum  Topic

I believe you have to swap the red and black wire with the Align sensor. Not sure if those are the ones you swap but I know you have to swap two wires or it will not work.

Personally I would spend the $10 and buy a CYG or MultiGov sensor and be done with it.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-19-2014 03:52 PM  4 years agoPost 11
automagp68

rrNovice

Colorado

My Posts: All  Forum  Topic

Yea i know about swapping the pins. Ive done that before on an old nitro getting it to work with the spectrum 7110 gov/RX combo unit

What sensor are you talking about? I guess i could just get a multi gov and not even try the vbar gov if i wanted

I was also thinking about an ikon because of its gov built in and they are cheap

PM  EMAIL  Attn:RR  Quote
06-19-2014 09:25 PM  4 years agoPost 12
billybob

rrVeteran

Torrance, CA

My Posts: All  Forum  Topic

I've been using the blue line sensor in my rave ENV nitro since the blue line came out. Stuck on with some 3m tape and a small Velcro strap around the sensor for good measure...super smooth in hover and smacking it around hard. Hit the dirt hard a few times to, still rockin. Silver is great also..you decide

PM  EMAIL  Attn:RR  Quote
06-20-2014 04:08 AM  4 years agoPost 13
Ghostrider

rrElite Veteran

San Diego, CA

My Posts: All  Forum  Topic

What sensor are you talking about? I guess i could just get a multi gov and not even try the vbar gov if i wanted
http://www.experiencerc.com/store/a...sor-p-1513.html

PM  EMAIL  GALLERY  Attn:RR  Quote
06-20-2014 05:16 AM  4 years agoPost 14
automagp68

rrNovice

Colorado

My Posts: All  Forum  Topic

Just got a silver line from the classifieds

So who here is using internal silver line gov for a nitro with the align sensor?

Any tips on setup?

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 1284 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsV-Bar › Vbar Blue line nitro gov with align sensor?
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Sunday, August 19 - 8:30 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online