RunRyder RC
WATCH
 1 page 580 views TOPIC CLOSED
HomeAircraftHelicopter
e-
Electric General Discussion
› is there a way to run just tail servo at hv?
06-05-2014 03:27 AM  4 years agoPost 1
charleshodge

rrNovice

spring hill fl

My Posts: All  Forum  Topic

Wanna run 3 ds610s ands a bl850h HV tail servo.is there a received where certain or individual slots can be adjusted in voltage?or a way to split into servo wire were the voltage runs to servo and not back into RX?

charles hodge

PM  EMAIL  GALLERY  Attn:RR
06-05-2014 04:08 AM  4 years agoPost 2
TomC

rrKey Veteran

Gold Coast, Queensland, Australia

My Posts: All  Forum  Topic

No easy or practical way of doing this that I am aware of. From the spec sheet this HV tail servo still has very good torque/speed at 6v (9kg/0.045sec). So if it were me, I'd just run it all at regulated ~6v.

Also, at the lower voltage this HV servo will draw a bit less amps and will probably run cooler, and last longer imho.

Cheers,
TomC

Nqx,Mcpx-BL,300x,450x,500x,550x
Ion-x, 10s ,SS
TT X50E 10s, HC3-Sx

PM  EMAIL  GALLERY  Attn:RR
06-05-2014 04:46 AM  4 years agoPost 3
charleshodge

rrNovice

spring hill fl

My Posts: All  Forum  Topic

Probally just gonna run em all off 6.6 life,thanks for the response

charles hodge

PM  EMAIL  GALLERY  Attn:RR
06-05-2014 05:02 AM  4 years agoPost 4
LaDon

rrVeteran

Fort Dodge .Ia

My Posts: All  Forum  Topic

I think you can with the new reactor regulator from Scott gray. I know you can set different outputs in it. There is an article in the magazine that you get from the AMA this month. Just glanced at it but I think I did see that in there

Team Jr

PM  EMAIL  GALLERY  Attn:RR
06-05-2014 05:24 AM  4 years agoPost 5
TomC

rrKey Veteran

Gold Coast, Queensland, Australia

My Posts: All  Forum  Topic

A 6.6v life pack should work ok but I don't think that the extra little bit of (initial)voltage is going to make much diff with this tail servo. Just monitor your 610's cyclic temps and let us know how you make out. Thanks.

Cheers,
TomC

Nqx,Mcpx-BL,300x,450x,500x,550x
Ion-x, 10s ,SS
TT X50E 10s, HC3-Sx

PM  EMAIL  GALLERY  Attn:RR
06-05-2014 04:14 PM  4 years agoPost 6
charleshodge

rrNovice

spring hill fl

My Posts: All  Forum  Topic

I have a 700 that I run 610 on a 6.6 and they come down cool as can be running 700mm on a 800mx.I hear of some people running em off a straight 2 cell lipo but don't know if its worth the abuse for the very little more its gonna do.they are saying there coming down not even warm on the 2 cell also.

charles hodge

PM  EMAIL  GALLERY  Attn:RR
06-09-2014 01:21 AM  4 years agoPost 7
nappyroots2182

rrElite Veteran

Moline, il

My Posts: All  Forum  Topic

is it possible to run the black and red from the receiver to the tail servo for power and the white for signal from the gyro only? i dont think there is much benefit to HV tail. i just use a stepdown right before the gyro

PM  EMAIL  GALLERY  Attn:RR
06-15-2014 06:44 AM  4 years agoPost 8
charleshodge

rrNovice

spring hill fl

My Posts: All  Forum  Topic

You can run a Scott gray dual HV output ,3s input regualor and run either side between about 5-9 voltsand just run rudder on hv

charles hodge

PM  EMAIL  GALLERY  Attn:RR
06-15-2014 08:32 AM  4 years agoPost 9
TomC

rrKey Veteran

Gold Coast, Queensland, Australia

My Posts: All  Forum  Topic

Looks good Charles. I have not seen that one used anywhere although ~$150 cost just to run an HV tail servo marginally faster seems a bit pricey to me. If you go that way, be sure to let us know how you make out. Thanks.

Cheers,
TomC

Nqx,Mcpx-BL,300x,450x,500x,550x
Ion-x, 10s ,SS
TT X50E 10s, HC3-Sx

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 580 views TOPIC CLOSED
HomeAircraftHelicopter
e-
Electric General Discussion
› is there a way to run just tail servo at hv?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, December 17 - 3:04 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online