RunRyder RC
WATCH
 1 page 792 views POST REPLY
Home✈️Aircraft🚁Helicoptere-AlignT-REX 450 › 450 pro dfc
04-10-2014 01:47 AM  5 years ago
Topic Vote0Post 1
MCCLAIN

rrNovice

pennsboro WV

MyPosts All Forum Topic
450 pro dfc
Will domanator head block fit a 450 pro head? Thanks.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-10-2014 04:32 PM  5 years ago
knightofcarnage

rrElite Veteran

chicago

MyPosts All Forum Topic
Yes it does.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-10-2014 11:05 PM  5 years ago
MCCLAIN

rrNovice

pennsboro WV

MyPosts All Forum Topic
trex450 dfc
whats the deal with the 450 dfc head block helis like new and the head has alot of play? thanks for your help.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-10-2014 11:22 PM  5 years ago
knightofcarnage

rrElite Veteran

chicago

MyPosts All Forum Topic
The head block is the same but new feathering shaft with new thrust bearings. Let me double check that.

Ok ok you are taking about the head block with new side reanforcment . That actual came out months before 450l . It's much better then the orignal block. I would still get the feathering shaft.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-11-2014 12:54 AM  5 years ago
AWittleWabbit

rrElite Veteran

O.C., CA

MyPosts All Forum Topic
💎Sustaining Member
Yippy kai yay
The old non clamping headblock will move a bit on the mast. The new clamping one is solid.

The new feathering shaft is great. Be sure to read the instructions, the thrust bearings go in differently.
Heli-itis sufferer.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-12-2014 02:42 PM  5 years ago
MCCLAIN

rrNovice

pennsboro WV

MyPosts All Forum Topic
head blok
Thanks for all your help guys, some good info did not know about feathering shaft.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-16-2014 02:11 AM  5 years ago
Trexwilly

rrVeteran

FL USA

MyPosts All Forum Topic
Yes they do, I had a set of grips that had "dents" in them, fromn the blades folding back doing autos, so I could not get the Radials out, the thrust bearing work the old way, just make sure you get it shimmed right!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-16-2014 02:20 AM  5 years ago
AWittleWabbit

rrElite Veteran

O.C., CA

MyPosts All Forum Topic
💎Sustaining Member
Hi Willy,

I had the same problem. I used a rounded punch to flatten out the dent so the bearings can come out. The aluminum is pretty soft so it didn't take too much.
Heli-itis sufferer.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-16-2014 07:19 PM  5 years ago
Trexwilly

rrVeteran

FL USA

MyPosts All Forum Topic
Thanks, yeah i have since replaced the grips, I crash a fair amount so I cycle through the "perishable" Items kind quick!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 792 views POST REPLY
Home✈️Aircraft🚁Helicoptere-AlignT-REX 450 › 450 pro dfc
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Wednesday, October 23 - 6:47 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online