RunRyder RC
WATCH |
1 page 579 views | Post Reply |
| RunRyder | RunRyder |
|
|
0| Chris Lupa
rrKey Veteran Lancaster, UK |
'V' Light Blinking - Need Help! Hi all,I successfully set up my Vbar Pro on my Goblin 700 a few weeks back, and all seemed well. Now, however, the 'V' on the unit keeps blinking slowly. As a result, I rebound the model on a new setup and the satellites go solid orange, but the 'V' keeps blinking, only this time fast. As a result, the model doesn't seem fully bound and does not transmit my stick movements to the servos. Any thoughts?I have tried rebinding many times, with a fully charged battery and transmitter, but to no avail. The unit still responds to movement when I move the model on the bench, indicating functionality, and the satellites are definitely bound but I can't seem to make the 'V' go solid orange. I have tested on my Logo and that works fine, so not a transmitter issue.The model hasn't had a single flight yet, and I'm due for a show next month so please help!Many thanks,Chris |
| SHARE PM EMAIL HOMEPAGE GALLERY Attn:RR Quote | |
| barely can fly
rrApprentice oxford ga. usa |
Now I have never seen one move fast thru each color and not respond to transmitter inputs. Also had one that was stuck on one color but the logs showed elevator sensor out of range, replaced the sensor and all was normal again. Go back thru the setup and double check everything. |
| SHARE PM EMAIL Attn:RR Quote | |
WATCH |
1 page 579 views | Post Reply |
| RunRyder | RunRyder |
|
|
Thursday, February 25 - 10:36 am - Copyright © 2000-2021 RunRyder EMAIL • Enable Cookies
