RunRyder RC
| 3 Topic Subscribe |
WATCH |
1 page 1141 views | POST REPLY |
| Scorpion Power | Scorpion Power |
|
|
| 03-15-2014 08:38 PM 4 years ago | Post 1 |
 yamahajoerrApprentice ROGERS , AR 72758 | I have seen videos of guys running lower headspeeds on the 7.2 and was wondering if this was with stock dampners. Mine seems to wobble if i get under 2000 rpm. Thanks for the help | ||
| |||
| 03-16-2014 01:32 PM 4 years ago | Post 2 |
| Lada1 rrNovice Ostrava, Czech | I run 1350rpm and up - no wobble. But at the certain level some resonance may occur.also one guy flies very low rpm | ||
| |||
| 06-11-2014 07:39 AM 4 years ago | Post 3 |
| meatbomber rrApprentice Klatovy, Czech Republic | 1550, 1650 and 1950 max on mine, no wobble, with stock dampeners and shimming.Wobble is also a factor of blades and the flybarless settings.I have a V-bar and MsComposit Rapids 710mm | ||
| |||
| 06-29-2014 10:59 PM 3 years ago | Post 4 |
| brushless2401 rrNovice orlando, florida united states | Try checking your blades that they are the same tightness and ones not lose and the other is tight as this will caues a Wobble due to one blade laging more than the other | ||
| |||
| 07-01-2014 01:09 AM 3 years ago | Post 5 |
| yamahajoe rrApprentice ROGERS , AR 72758 | Found the problem. It was the swash | ||
| |||
WATCH |
1 page 1141 views | POST REPLY |
| Scorpion Power | Scorpion Power |
|
|
| Print TOPIC | Make Suggestion |
Tuesday, June 19 - 4:11 am - Copyright © 2000-2018 RunRyder EMAIL • Enable Cookies
