RunRyder RC
WATCH
 1 page 425 views POST REPLY
HomeAircraftHelicopterMain Discussion › multigov on hitec optima 7 receiver help needed
01-04-2014 04:29 PM  4 years agoPost 1
lajwab

rrApprentice

Chicago, ILL

My Posts: All  Forum  Topic

Hi,

I am setting up a friend's heli.
I an trying to setup my Aerospire Multigov with my Hitec Optima 7 receiver on a Trex 600N.
Can anyone guide me how can I coonect this governor to this receiver. I am using a Y lead on the CH7 so I have only one port open on my Y lead because the first port I have plugged in the battery.

Will this 7 channel receiver work with this Gov. or I need 8 channel for sure?
On which channel will this governor should be connected. I have GEAR channel already used for my Gyro.
Any help will be highly appreciated.

Thanks,

Arshad

PM  EMAIL  GALLERY  Attn:RR  Quote
01-07-2014 11:50 AM  4 years agoPost 2
FlyforMaelle

rrNovice

Canada

My Posts: All  Forum  Topic

.
Thr
Ele
Rud
Gyro
Gryo gain
Gov
Gov gain
Batttery input

Min 7 channels open + 1 input from switch battery. I wouldn't y a battery pack into an rx through a used channel. I could be wrong but it sounds like a no no. If you haven't bought the rx just get the 8 ch and never think about it again.

Hope that helps

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-09-2014 01:40 AM  4 years agoPost 3
jbess

rrNovice

Waterbury, Ct. USA

My Posts: All  Forum  Topic

On which channel will this governor should be connected. I have GEAR channel already used for my Gyro.
Hi. It should work fine. I have a multigov pro on my raptor 90 with a 7 channel reciever. channel 7 would be your flight mode switch which selects normal, idle 1 or idle2 if available and corresponding set rpm in multigov.

JB

"Spinning Props Are Dangerous'

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-10-2014 04:00 AM  4 years agoPost 4
lajwab

rrApprentice

Chicago, ILL

My Posts: All  Forum  Topic

Many Thanks !

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 425 views POST REPLY
HomeAircraftHelicopterMain Discussion › multigov on hitec optima 7 receiver help needed
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, August 19 - 6:47 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online