RunRyder RC
WATCH
 1 page 1921 views POST REPLY
Home✈️Aircraft🚁Helicoptere-KDSOther › kds e-bar v2
12-15-2013 06:18 AM  5 years ago
Topic Vote0Post 1
khamilton

rrNovice

ohio

MyPosts All Forum Topic
kds e-bar v2
might have a bad unit. could someone send proper way to hook up to a spectrum receiver ar6200 dsm2. I have no control response on pitch aileron side at all. when I first power it up it makes swahplate jump up and down 8 times then initionalizes . very confused as to why. I have three e-bars v-1 nevr had anything like this thanks
SHARE  PM  EMAIL  Attn:RR  Quote
12-15-2013 02:14 PM  5 years ago
abwomack

rrVeteran

Houston, TX - U.S.

MyPosts All Forum Topic
PM
please pm me with a way for someone to contact you.
Allen Bryan
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-18-2013 01:07 AM  5 years ago
ADHD

rrApprentice

Jacksonville, FL

MyPosts All Forum Topic
Hey KHamilton, did you get your issue resolved?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-17-2014 11:18 PM  5 years ago
acri84

rrApprentice

covington, ga -usa

MyPosts All Forum Topic
Guys,
Sorry for posting this question here, seems like the correct place.
Does the KDS E-Bar that is included in the 5.5 kit bring the programing display?

Does anyone have instructions for the FBL system?

Thanks,

Mike
Mike
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-17-2014 11:21 PM  5 years ago
ADHD

rrApprentice

Jacksonville, FL

MyPosts All Forum Topic
It does

Its pretty easy to setup. Nelson has done a pretty good video. PM and I'll send you a link.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-22-2014 10:44 PM  5 years ago
acri84

rrApprentice

covington, ga -usa

MyPosts All Forum Topic
Ok so I have a 5.5 pnp combo on it's way to me. In the mean time someone here on RR was selling a new ebar v2 so I bought it so I could try it out and compare it to the Brain / Ikon which is what I am using on all my birds. I am installing ebar on 450 dfc pro. My problem right now is that I cannot get my Spectrum radio to bind. As a matter of fact I cannot get the satellite receiver to power on at all. I tried DSMX and DSM with the same results. I have the satellite plugged as per the instructions but I get no power to the satellite. Help Please.Mike
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2014 12:14 AM  5 years ago
ren

rrVeteran

Houston, TX

MyPosts All Forum Topic
Are you using only satellite or rx+satellite?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2014 12:59 AM  5 years ago
acri84

rrApprentice

covington, ga -usa

MyPosts All Forum Topic
Just the satellite. The 450 is too small to add a receiver also.Mike
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2014 02:20 AM  5 years ago
ADHD

rrApprentice

Jacksonville, FL

MyPosts All Forum Topic
I'm assuming your powering the your ebar thru the ESC port via the BEC. Your Sat is using the adapter and you have that plugged into the SBUS port. You plug in your program panel then plug in your lipo you should see the panel power up with the KDS logo. Scoll to #2 mounting and change teh RX type to JR/KDS I believe. Then recycle power.

Also, I've been told to bind the TX to that Sat using a separate RX then move the Sat to the Ebar.

Let me know if that gets you going.. I'm a Futaba guy so I'm just going off memory here
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2014 05:32 PM  5 years ago
acri84

rrApprentice

covington, ga -usa

MyPosts All Forum Topic
Friendly Helper ( don't have ur name )
You are correct I bound satellite with spectrum receiver then transferred back to e bar and all is good. Thanks for your help. Please stand by, I am probably going to need ur help again.
Mike
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1921 views POST REPLY
Home✈️Aircraft🚁Helicoptere-KDSOther › kds e-bar v2
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Tuesday, October 22 - 9:25 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online