RunRyder RC
WATCH
 1 page 1184 views POST REPLY
11-02-2013 07:35 PM  5 years ago
Topic Vote0Post 1
rjflyer

rrApprentice

Valley City, Ohio (Cleveland)

MyPosts All Forum Topic
head axle
re-stacking c-clip head axle, I have original instructions. rubber o rings, 2 shims,and a 1mm washer, then retainer clip, my problem is I have about 3mm horizontal play on head axle. If I remember right there should not be any play, the axle should be snug in the head. It does not seem correct with side to side movement. Can someone verify?
Rick...God,I love this hobby!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-04-2013 07:37 PM  5 years ago
geomecc

rrKey Veteran

Long Island ,NY

MyPosts All Forum Topic
re try it maybe u forgot somethingR I P Roman Jr. Team SKOOKUM SRW EFC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-11-2013 02:02 AM  5 years ago
Mark Dean

rrApprentice

Maryland

MyPosts All Forum Topic
I just verified with my head axle. Everything you mentioned sounds right except the washers. I only have the dampers, two shims, and then the snap rings on each side. Which shims are you using? The shim set includes 2 ea of .008, 2 ea of .015, 2 ea of .040. You must use at least the 2 .040 shims. I use both the .040 and .015 shims and that gives me a tight fit.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1184 views POST REPLY
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, July 23 - 1:33 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online