RunRyder RC
WATCH
 1 page 745 views TOPIC CLOSED
HomeRC & PowerAircraftHelicopterFlybarless Rotor Head SystemsV-Bar › NITRO GOV ON 5.3 VBAR PROBLEM PLEASE HELP!!!!!
10-31-2013 08:57 PM  4 years agoPost 1
NAFEAR

rrNovice

SSF,CA USA

My Posts: All  Forum  Topic

Hi guys,I was setting up my gov using a futaba 8fg super and did what I think had to be done.aux/gyro=7 and esc/throttle=3.I want to be able to use the gov in my radio so i set two percentages on it for testing 50%-90% .Got everything ready to go but my throttle servo did not move when in ID 1-2.BTW I enable ID 1-2 to be Gov'd,seems like the unit sees the values I have set in the radio but the throttle servo does not move at all.Moves when in normal.But it will move if a set a V curve in the radio.I know i am missing something but i am frustrated at this point.I can set any throttle curve in the radio and the servo will react to that,but in gov function I have to different percentages and does not make a beep.I know is seeing the throttle curve in the radio cause I see it moves relatively to the curve.PLease let me know.I hope I explained it good enough.Thanks guys.

When I flip my F/M switch to ID 1-2 I can see the head speed requested changing ,but the throttle servo does not move.

Any help will be really appreciated,,

PM  EMAIL  Attn:RR
10-31-2013 11:46 PM  4 years agoPost 2
Andy from Sandy

rrElite Veteran

Bedfordshire, UK

My Posts: All  Forum  Topic

I can't make much sense of what you have posted but I followed this post

http://www.helifreak.com/showthread.php?t=532319

I have a 14SG so similar to the 8FG. I am using a Silver Line. I have the throttle servo plugged into the Collective/ESC port.

I used combined mode and it works great. After setup I set my normal curve to 4, 30, 30, 30, 30. The 4 was needed to get a tickover and the 30 could be any value upto 49 so that I can rev the engine without the governor cutting in.

I have my IU1 TC set to 96% flat and my IU2 TC set to 99% flat as that is the values for the 2 head speeds I want.

If I want auto bailout I will need to play with my TH value as it will need to be raised a bit higher than where I have it set for tick over.

PM  EMAIL  GALLERY  Attn:RR
11-01-2013 02:44 AM  4 years agoPost 3
NAFEAR

rrNovice

SSF,CA USA

My Posts: All  Forum  Topic

I have tried the combined set and had no problems there.But I am trying the 2 channel setup now with futaba rx s-bus..

PM  EMAIL  Attn:RR
11-01-2013 08:45 PM  4 years agoPost 4
NAFEAR

rrNovice

SSF,CA USA

My Posts: All  Forum  Topic

Need help guys please!!!!.Here is my update.

So,when I am looking at the live display I can see the system adjusting to the requested head speed.It is moving relatively to the % I have set in the radios gov,but the throttle servo is not. I can see the throttle bar not moving.

If I set a V shape throttle curve for ID 1 and 2 then the servo works in relation to those V shape throttle curves.But when I look at the live display on the system/program it looks like it is adjusting to the requested head speed from the gov in my radio but the servo looks like is moving in relation to the V shape throttle curves.

From what I know and understand the throttle curves should be overwritten when you flip ID 1-2 when it has been enable in the radio which I have,is only INH for normal mode.

I am confused,any help will be appreciated,Thanks Wally

Vbar 5.3 pro
Futaba s- bus
Futaba 8fg super
600N Align

PM  EMAIL  Attn:RR
WATCH
 1 page 745 views TOPIC CLOSED
HomeRC & PowerAircraftHelicopterFlybarless Rotor Head SystemsV-Bar › NITRO GOV ON 5.3 VBAR PROBLEM PLEASE HELP!!!!!
 Print TOPIC  Make Suggestion 

 0  Topic Subscribe

Thursday, October 18 - 6:44 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online