RunRyder RC
WATCH
 1 page 2087 views POST REPLY
Home✈️Aircraft🚁HelicopterAlignT-REX 600N › 600n convert to flybarless
10-29-2013 09:33 AM  5 years ago
Topic Vote0Post 1
deafheliflyer

rrKey Veteran

Arizona

MyPosts All Forum Topic
600n convert to flybarless
Looking to convert my 600 LE nitro to flybarless.. I have a lot of experiences with Mikado, so Ill stick with Vbars.. This isn't a post of which flybarless system is best..

What do I need to convert in terms of head/links etc.. Im currently using stock align 610/620, CY stickbangers, rail tail blades...

This is a NON DFC setup FYI.. Would it be cheaper to just buy the Align 600N DFC combo, sell the 3gx than to convert??

Thank you!!

Michael
Crash-Prone and overcoming it!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-29-2013 04:13 PM  5 years ago
Funky Trex

rrElite Veteran

Westerville, OH - USA

MyPosts All Forum Topic
They make a "3g" mainshaft for the 600n. It was used with the old 3g heads when Align had the 3g conversions. I was able to just swap this main shaft on my 600n and then the v1/v2 flybarless heads fit just like they do on the 550/600 electrics.

Since the new 600n DFC version came out, there is probably another mainshaft for the DFC heads. It should be as simple as the conversion I did. Swap mainshafts, then swap the entire head for the new 550/600 DFC head.

Both style heads can usually be found complete on ebay (brand new pulled from kits). I have picked up a few 550/600 heads like this to convert some helis to fbl.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-29-2013 07:11 PM  5 years ago
meowguy

rrVeteran

Saco, ME

MyPosts All Forum Topic
This might help you from Ready Heli. It's for the non-DFC version. That's the one I am using on mine. Listings for silver and black parts as well. You can call them if you have any questions.

http://www.readyheli.com/assets/ima...ge_align_fb.pdf
"Sweet dreams and flying machines in pieces on the ground." J. Taylor
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-29-2013 07:58 PM  5 years ago
ICUR1-2

rrElite Veteran

Ottawa, Ontario

MyPosts All Forum Topic
Would it be cheaper to just buy the Align 600N DFC combo, sell the 3gx than to convert??
NO but more fun
3GX you'll be lucky to get 100$ for it.

when I did my conversion I replaced the grips got 2 links to match the size I needed and added a swash driver, It was very inexpensive for me the way I did it
I'll post the part #s later

flies like a dream

spending time, paying attention
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-29-2013 08:29 PM  5 years ago
ICUR1-2

rrElite Veteran

Ottawa, Ontario

MyPosts All Forum Topic
part #s
H60204 blade grips 42.50
H60232 Blade grip arms 19.07
1 x TITANIUM TURNBUCKLES (M2.5 X 71MM)- 2 PCS TREX 600/700 FBL C $18.19
The swash follower is a century heli version that I happen to already have on hand.
spending time, paying attention
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-30-2013 05:19 PM  5 years ago
deafheliflyer

rrKey Veteran

Arizona

MyPosts All Forum Topic
hi
Thank you for the replies..

I was just thinking of using the Mikado head, since I prefer driver-less..

MIchael
Crash-Prone and overcoming it!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-30-2013 07:06 PM  5 years ago
ICUR1-2

rrElite Veteran

Ottawa, Ontario

MyPosts All Forum Topic
you're welcome
there must be a hundred ways to do it, the important thing is to have fun
spending time, paying attention
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 2087 views POST REPLY
Home✈️Aircraft🚁HelicopterAlignT-REX 600N › 600n convert to flybarless
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Sunday, August 18 - 8:49 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online