No, it says JR because the PLUGS will mate with JR equipment with no additional modifications. The plugs will also fit Futaba and Airtronics Z connectors. Pretty much the plugs are universal and will work with any modern-day radio.
Take a close look at your heli's right-side main frame. There is a large, vertical slot milled into it to accept just about any RC slide switch known to man or beast (circled in blue
). This switch fits into that category.
Your switch --
Wire Gauge: 20AWG
Length: 39mm (1.5" )(overall including side mounting flanges)
Width: 12mm (0.5" )
Height: 22mm (0.9" )(not including slider switch)
If in doubt, measure your heli switch opening.
You've been building this particular kit for over a year now. Exactly how close are you to finishing it?
* Making the World Better -- One Helicopter at a time! *