RunRyder RC
WATCH
 1 page 611 views POST REPLY
HomeAircraftHelicopterMiniature Aircraft Whiplash & Fury 55 › X-Cell 60 how do i remove the main shaft ?
10-22-2013 10:33 PM  5 years agoPost 1
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

im trying to remove the main gear.
i took the hex screw out of the gold thingy does the gold thing screw off ?

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-22-2013 10:52 PM  5 years agoPost 2
xcellgasman101

rrElite Veteran

WOODWARD, OKLA....

My Posts: All  Forum  Topic

there is a pin under the hex nut, turn it 180 and push the pin out, XGM/VGM

John Crotts
www.soonerhelicamproductions.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-22-2013 11:05 PM  5 years agoPost 3
xcellgasman101

rrElite Veteran

WOODWARD, OKLA....

My Posts: All  Forum  Topic

wait a minute, that a limited slip, not for sure, I think it should just pull off, then there is a hex screw, with a pin going thru the main shaft and the metal part of the lower block holding the gear on.. I think,,

John Crotts
www.soonerhelicamproductions.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-22-2013 11:27 PM  5 years agoPost 4
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

xcellgasman101
wait a minute, that a limited slip, not for sure, I think it should just pull off, then there is a hex screw, with a pin going thru the main shaft and the metal part of the lower block holding the gear on.. I think,,
i got the gold thing off now i see a collar above the main gear and it looks like it has a second collar above.

thank you

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-23-2013 12:25 AM  5 years agoPost 5
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

ok i got both collars loose and the gold thingy off

the shaft still will not move

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-23-2013 12:28 AM  5 years agoPost 6
xcellgasman101

rrElite Veteran

WOODWARD, OKLA....

My Posts: All  Forum  Topic

They may have the main shaft loc-tight to the bearnings,, Try some heat from a heat gun or sodiering Iron to see if that helps.. XGM/VGM

John Crotts
www.soonerhelicamproductions.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-23-2013 12:31 AM  5 years agoPost 7
xcellgasman101

rrElite Veteran

WOODWARD, OKLA....

My Posts: All  Forum  Topic

Also there will be a pin going thru the main shaft and the lower part of the main gear that is metal, there will be a grub screw that you will take out, then push the pin out from the other side, to be able to remove the main gear off the main shaft.. XGM/VGM

John Crotts
www.soonerhelicamproductions.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-23-2013 12:58 AM  5 years agoPost 8
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

woo hoo its out thanks

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-23-2013 02:21 AM  5 years agoPost 9
xcellgasman101

rrElite Veteran

WOODWARD, OKLA....

My Posts: All  Forum  Topic

Congrats!! How did you do it?? XGM/VGM

John Crotts
www.soonerhelicamproductions.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-24-2013 09:02 PM  5 years agoPost 10
wc_wickedclown (RIP)

rrProfessor

long beach calif

My Posts: All  Forum  Topic

xcellgasman101
Congrats!! How did you do it?? XGM/VGM
what is XGM/VGM ??

i just loosened both of the colors then i removed the grub screw
from the gold thingy then i had to unscrew the gold thingy off of the shaft then there was another grub screw

Insha Allah made in america

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 611 views POST REPLY
HomeAircraftHelicopterMiniature Aircraft Whiplash & Fury 55 › X-Cell 60 how do i remove the main shaft ?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, November 15 - 2:30 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online