RunRyder RC
WATCH
 29 pages [ <<    <     22      23     ( 24 )     25      26     NEXT    >> ] 52109 views POST REPLY
Home✈️Aircraft🚁Helicoptere-AlignT-REX 150 › Align T-Rex 150 DFC
12-12-2013 02:44 PM  5 years ago
knightofcarnage

rrElite Veteran

chicago

MyPosts All Forum Topic
Yes that works it's exactly how I'm charging.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-12-2013 05:30 PM  5 years ago
benysjets

rrNovice

Warner Robins ga

MyPosts All Forum Topic
Trex 150
Ya I got my heli but not my spare parts order and there's no way I'm gonna have this heli just sit in front of me and not be able to fly it. I did turn my cyclic Potts gain up to 12 o'clock and gyro gain to 49 seems to work very well for me
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-12-2013 05:42 PM  5 years ago
Jasonbrown22

rrNovice

Covington, GA

MyPosts All Forum Topic
Swashplate
Anyone having problems with swashplate? Me and my friend got ours 2 days ago, mine came apart and caused a nasty crash, and his came apart as well but fared better.
SHARE  PM  EMAIL  Attn:RR  Quote
12-12-2013 06:27 PM  5 years ago
benysjets

rrNovice

Warner Robins ga

MyPosts All Forum Topic
150 swash
I havent had any problems yet. But where did it come apart?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-12-2013 06:30 PM  5 years ago
Jasonbrown22

rrNovice

Covington, GA

MyPosts All Forum Topic
Bottom part of swash coming off of the bearing
SHARE  PM  EMAIL  Attn:RR  Quote
12-12-2013 06:56 PM  5 years ago
pepr

rrNovice

Dania, FL-USA

MyPosts All Forum Topic
Bottom part of swash coming off of the bearing
Just like the mcpx bl. Put a few drops of ca on the outside of the bearing and put it back in place. Never had problems with my mcpx bl swash since I did that.

As soon as I'll get mine, I intend to take the swash apart on purpose and glue the bearing in place so it doesn't happen in flight.

That's the price to pay to be the first guys.
SHARE  PM  EMAIL  Attn:RR  Quote
12-12-2013 11:52 PM  5 years ago
lyonsd58

rrNovice

Townsend, MA

MyPosts All Forum Topic
My Trex 150 arrived today!!!
Well both my new 150 and my Spektrum sat Rx arrived today from two different web sites ordered on different days these week, both a day early. Yah!!
Take a look right out of the box next to my Blade mCPx BL...

Now...how to charge this odd battery. I have an iCharger 206b with a RC Buddy balance board with JST-XH & EC3's (6 ports each). The Align 150 batteries plugs great into one of the XH balance connectors, but when I run the 206b for a 7.4v 2S it gives me a BATTERY CHARGE-LOW VOLTAGE error. Anyone know how this should work?

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-12-2013 11:54 PM  5 years ago
JKos

rrProfessor

Redondo Beach, CA

MyPosts All Forum Topic
but when I run the 206b for a 7.4v 2S it gives me a BATTERY CHARGE-LOW VOLTAGE error. Anyone know how this should work?
The battery positive and negative leads MUST be connected to the charger's output port. The iChargers will not charge through the balance port only.

The balance connections and the EC3s on your balance board are independent and do not offer that connectivity.

You could make a jumper that connects the correct pins on the balance side to the EC3 side. But you would have to make sure to take that jumper off if you charge any other batteries.

- John
RR rules!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-13-2013 12:04 AM  5 years ago
jschenck

rrProfessor

La Vista, NE.

MyPosts All Forum Topic
yep, a jumper will work just fine: As Long as you DON'T connect up another battery configuration to your parallel board. E.G. you can charge up to 6 packs like that but don't hook up a 3S and a 2S with the jumper in place or I think you'd create a short.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-13-2013 12:31 AM  5 years ago
NQNA

rrElite Veteran

USA

MyPosts All Forum Topic
Where is my 150...?????
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-13-2013 12:37 AM  5 years ago
benysjets

rrNovice

Warner Robins ga

MyPosts All Forum Topic
Dsmx satellite
I took the cover off the saettelite. 100% better. The satellite will fit without taking it of but it was a tight squeez. And I think it was causing vibrations cause it was pressed up against the canopy. I did have some shakes on the second flight haven't flown it sense. So I don't know for sure if that was causing it though
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-13-2013 12:46 AM  5 years ago
NQNA

rrElite Veteran

USA

MyPosts All Forum Topic
It is interesting how many new Heliman are posting on the 150...
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-13-2013 01:11 AM  5 years ago
Stephen Born

rrElite Veteran

USA

MyPosts All Forum Topic
NQNA,

I too have noticed the prominent participation.
SHARE  PM  EMAIL  Attn:RR  Quote
12-13-2013 01:20 AM  5 years ago
lyonsd58

rrNovice

Townsend, MA

MyPosts All Forum Topic
150 Battery charge ?
I don't get it. So how did Align expect us who have our own power supply and chargers to charge these odd batteries. I can't believe we're expected to klug jumper wires to get power to balance connectors. There isn't a standard balance board/parallel board to do multiple batteries? I already own two boards with my iCharger (one for my little 2S's with PH3's for my mCPxBL and 130x) and the larger one for my Blade 450 3D batteries. There must be a good way to charge these things without fear of jumper and shorting!

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-13-2013 01:28 AM  5 years ago
NQNA

rrElite Veteran

USA

MyPosts All Forum Topic
Align also should note that..marketing..
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-13-2013 01:31 AM  5 years ago
NQNA

rrElite Veteran

USA

MyPosts All Forum Topic
Too bad I will have a new helicopter that I can't fly because I can't charge it..........."..........
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-13-2013 01:41 AM  5 years ago
Jasonbrown22

rrNovice

Covington, GA

MyPosts All Forum Topic
The charger that they offer won't accept more than 12v also, I tried a 15v transformer/wall adapter from another charger with correct polarity and it would not work. Haven't tried on a running vehicle but I would bet it wouldn't work there either as the alternator charges above 13v.
SHARE  PM  EMAIL  Attn:RR  Quote
12-13-2013 02:52 AM  5 years ago
nynextel88

rrApprentice

longisland, NY

MyPosts All Forum Topic
Heres a quick vid of my 3rd flight with this new bird, Still getting used to it but absolutely loving it!

Watch at YouTube

Team Align (Enterprise Hobby)
Thunder Power RC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-13-2013 03:12 AM  5 years ago
patriot21

rrKey Veteran

Byron,MN

MyPosts All Forum Topic
I was hoping for a crash in that video to see how it holds up hitting a hard floorMy Sponsor:VISA
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-13-2013 05:54 AM  5 years ago
NQNA

rrElite Veteran

USA

MyPosts All Forum Topic
looks good..
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 29 pages [ <<    <     22      23     ( 24 )     25      26     NEXT    >> ] 52109 views POST REPLY
Home✈️Aircraft🚁Helicoptere-AlignT-REX 150 › Align T-Rex 150 DFC
 Print TOPIC  Make Suggestion 

 46  Topic Subscribe

Sunday, October 20 - 2:53 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online