RunRyder RC
WATCH
 1 page 598 views TOPIC CLOSED
HomeAircraftHelicopterMain Discussion › ikon/ tracx fbl unit cant connect to pc
10-09-2013 05:22 AM  4 years agoPost 1
johnbs8

rrKey Veteran

roseville michigan

My Posts: All  Forum  Topic

got the tracx unit for my warp... wont connect to pc. popup window shows com1, i choose it and it says can not connect. anyone els have this happen? also the lights on the unit are blinking green to red then after about 20 sec or so it just blinks red. what gives?

TT X50 Nitro
Warp 360
Logo 550sx
TeaM KicKnWinG

PM  EMAIL  GALLERY  Attn:RR
10-09-2013 04:25 PM  4 years agoPost 2
kingmeow

rrApprentice

The Garden State, US

My Posts: All  Forum  Topic

When you first plug in the Ikon, your PC should start loading the driver. Once that is completed successfully, it should show you the correct COMx port when you start the software.

Default is COM1 when you first start the software. On my system (Win7 x64), after loading the driver, the only choice for me from the software was COM3. Worked perfectly.

I believe the LED blink pattern is correct.

PM  EMAIL  Attn:RR
10-13-2013 12:23 AM  4 years agoPost 3
johnbs8

rrKey Veteran

roseville michigan

My Posts: All  Forum  Topic

thanks for the reply, im a little late on gettn back to this post... but i did find out my data cable that came with the unit was bad. got a new one and it picks up on com6. Thanks, John

TT X50 Nitro
Warp 360
Logo 550sx
TeaM KicKnWinG

PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 598 views TOPIC CLOSED
HomeAircraftHelicopterMain Discussion › ikon/ tracx fbl unit cant connect to pc
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, July 16 - 9:59 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online