Selling my Newly Built, Barely flown AGL Hobbies UAP2 Hexa.
(updated price Reason: Totally forgot about several parts in the initial cost. Someone would have have made an awesome purchase. Price adjusted now.)
This is a Bind and Fly sale if you use a Futaba Transmitter. I can provide you with the config file for an 8FG if you like. If you don't want the Futaba RX, then I will subtract $75.00 from the total price.
Arms are CF Tube 21.5mm x 19.5mm 1/2m
Overall Hexa size is technically 1000mm
3x TL-1 kits (3 blocks instead of 2)
16mm CF Legs
Side Battery Mount Plates
Avroto 2814 Short Shaft Motors
ZTW 45A ESC- SimonK
DJI NAZA v1 w/GPS
Futaba R6303SB Reciever
2x CC Voltage Regulators
6x RCT Carbon Fiber 12x4.5 Propellers (Balanced)
Additional AGL Plate for Lower Mount
AGL Accessory Plate (for HDMI board, etc)
Accessory plate for 5.8Ghz VRX
Extra Blocks for Accessory Mounts
RCT ASP NEX 5/6/7 Brushless Gimbal
RCT Brushless Gimbal Controller Board
w/AR6100 Spektrum DSM2 Receiver.
Sony 700tvl CCD Cam with IRblock
ReadyMadeRC 400mW 1280/1258 VRX
ReadyMadeRC Cloverleaft Antenna (1.2Ghz)
Cyclops Breeze OSD (Flashed to latest firmware)
ImmersionRC 100mW 5.8Ghz VRX
5.8Ghz Spironet (Clone) Antenna
I can either supply you with an HDMI board that you can modify for an additional $20, or you can just add your own.
I also have an ultra-flex HDMI cable that I will add for an additional $20, which is a brand new $40.00 cable.
I can also just remove this VRX and Antenna and drop the price by $55.00
You will need two (2) 4S 5000mah or greater LiPo Batteries for flight as well as two (2) 3S 500mah-1000mah LiPo's for FPV and Gimbal Downlink power.
Selling for $2100.00 Local Pickup in North/Central Florida Only.
I can meet in Jacksonville, Orange Park, Gainesville, Ocala, or somewhere near those cities. If I meet you, you are not gong to get to fly this first. Nor am I going to fly it. I want to sell it and it flys perfectly. I can give you video to prove it. So no test drivers please. Also since this is a very complex multirotor, you will need to have some feedback here on RCG or RunRyder. Sorry to be so strict, but I've had people show up and say oh, are you sure you won't take $100's less? I mean you drove all the way here.".
I have great feedback and if you need references I have a list of people you can contact.
I am not currently parting this out. However, if you would like to purchase just the flying portion of the multirotor and no FPV equipment, I would consider removing them and subtracting the cost. Let me know if that's your interest and maybe we can make some kind of arrangement.
I am an individual seller, not a business, so this sale is final. I do not have the free time to teach you to operate this item or any of it's components and I cannot provide after sale support.