RunRyder RC
WATCH
 1 page 4389 views POST REPLY
HomeAircraftMulti-Rotor
e-
Multi-Rotor Main Discussion
DJI News  DJI A2 Multi-Rotor Flight Control System Has Been Available!
09-04-2013 05:15 PM  5 years agoPost 1
DJI InnovationsrrApprentice - Shenzhen, China - My Posts: All  Forum  Topic

DJI A2 Multi-Rotor stabilization controller is a complete flight system for various multi-rotor platforms for commercial and industrial AP applications. Based on the technology and design philosophy of DJI’s Ace series of high-performance controller, the A2 offers you a brand new flight experience. Its flight mode setup provides a seamless transition for current Ace One AP professionals. It utilizes high quality components precisely calibrated with temperature compensation in all gyros and sensors, industry renowned flight algorithm in autopilot and UAV field.

Combo discount is available, please contact your local dealer for detail information!

Major Functions:

1. A2 Flight Control System is designed with metallic appearance and high-performance GPS-COMPASS PRO;
2. Multi-control modes, including GPS mode, Manual mode and two kinds of ATTI. Modes;
3. Support various multi-rotors, including Quad-rotor(I4,X4),Hexa-rotor(I6,V6,Y6,IY6),Octo-rotor(X8,I8,V8)and customized type;
4. It is built-in Receiver DR16 with 16 channels, can support the external receiver, e.g. S-Bus,DSM2 and PPM;
5. Advanced FailSafe function, the aircraft can hover or Go home and Landing automatically;
6. Attitude is controllable when one motor output of the Hexa-rotor is failed;
7. IOC(Intelligent Orientation Control),including Course lock, Home point lock and Point of interest flying;
8. 2-axis gimbal supported;
9. Two level low-voltage protection;
10. LED-BT-I module is integrated with LED and Bluetooth, can support the para configuration on mobile device via Bluetooth communication;
11. iPAD Ground Station functionsupported with the DJI 2.4GHz Bluetooth Data-link;
12. Sound alarm function for the flight control system;
13. Remote gain value adjustmentsupported by setting a knobon the Transmitter;
14. Support DJI series products, including Z15 gimbal, iOSDMark II, 2.4G DATA LINK and iPAD Ground Station;

Please log into DJI.com for more information!





PM  EMAIL  Attn:RR  Quote
09-05-2013 02:30 AM  5 years agoPost 2
flyrchelis

rrApprentice

La Quinta, Ca

My Posts: All  Forum  Topic

All the US Dealers say backorder. Does that mean that haven't gotten any yet.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-05-2013 09:34 AM  5 years agoPost 3
XRHRD

rrApprentice

Honolulu, Hawaii

My Posts: All  Forum  Topic

.....

Heads up, it's my turn to crash & burn , NOT EVEN

PM  EMAIL  GALLERY  Attn:RR  Quote
09-13-2013 03:21 AM  5 years agoPost 4
ErichF

rrElite Veteran

Sutton, NH

My Posts: All  Forum  Topic

I'm rather puzzled why this system, advertised to be a purely industrial controller, is not compatible with the 900Mhz Data Link? The 900 on the WKM is absolutely bullet proof and has awesome range for certain types of missions.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-30-2013 01:28 PM  4 years agoPost 5
DJI Innovations

rrApprentice

Shenzhen, China

My Posts: All  Forum  Topic

DJI released new firmware v2.1 for A2!
What is new?

Firmware:

1.Enhanced performance of A2 flight control system in data loss situations that are caused by abnormal communications.
2.Optimized control performance, if the command of Yaw control stick is zero, the command variation of Elevator, Roll and Throttle will not change the aircraft attitude around Yaw.
3.Optimized IOC function and POI algorithm to improve user experience.
4.Optimized communication protocol.
5.Support to upgrade A2 GPS Module.
6.Fixed the attitude jitters during Failsafe and Go Home.

Assistant Software:

1.Added RC status display.

User Manual:

1.Added Failsafe settings for traditional receiver users.
2.Added RC status description.
3.Revised the control mode introduction.
4.Added trouble shooting list of motors start failures.
5.Added a note that if the second level low voltage alerts occur when the aircraft is during Failsafe and Go Home process or the aircraft is controlled by Ground Station, the aircraft will descend automatically.
6.Revised the recording conditions in IOC function.
7.Added a system error LED indicator shown in continuous 4 red blinks.
8.Revised the attitude status LED indicator, there is no blinks if the attitude status is good and continuous 3 white blinks if bad.
9.Added the note that when using with A2, the firmware of iOSD Mark II should be V3.0 or above and OSD Viewer should be V4.0 or above.

Notes for Upgrade:

1.For safety reasons, do not use the power battery for power supply during firmware upgrade. Reconfigure all parameters in the Assistant Software after firmware upgrade.
2.When using the A2 flight control system firmware version V2.1, the firmware of other DJI products used in conjunction must be matched with the requirements in the table below.

Please click here for more information.

PM  EMAIL  Attn:RR  Quote
12-31-2013 09:06 AM  4 years agoPost 6
DJI Innovations

rrApprentice

Shenzhen, China

My Posts: All  Forum  Topic

DJI released assistant software for Mac!
Mac style interface
Clean, modern Mac inspired interface that Mac users will love.

Different system, same operation
Usage is the same on Mac and PC versions, so if you’re used to the PC version you can switch straight over.

No more driver installs
No more downloading drivers to install Assistant. It just works.

Watch at YouTube

Operating system: Mac OS X 10.6(Lion) or above
Supported flight systems: Phantom 2 Vision, Phantom 2, A2

Please click here to download the Mac Assistant Software for Phantom 2 Vision.

Please click here to download the Mac Assistant Software for Phantom 2.

Please click here to download the Mac Assistant Software for A2.

PM  EMAIL  Attn:RR  Quote
01-02-2014 01:22 AM  4 years agoPost 7
DJI Innovations

rrApprentice

Shenzhen, China

My Posts: All  Forum  Topic

DJI released iOSD Mark II new firmware V3.0!
DJI released iOSD Mark II new firmware V3.0, Assistant Software V4.0 and User Manual V2.08!

What’s new?

Firmware:

1.Support for the A2 Flight Controller firmware V2.1 or above.
2.Support for the Phantom 2 main controller firmware V1.08 or above.
3.Added the Azimuth angle display to help users locate the aircraft.
4.Added the current battery level percentage display when connecting to Phantom 2.

Assistant Software:

1.Optimized for Win8 compatibility when using the iOSD device in Data View mode.

User Manual:

1.Add the Azimuth angle description.
2.Add the current battery level percentage description when connecting to Phantom 2.

Please click here for more information.

PM  EMAIL  Attn:RR  Quote
02-10-2014 11:19 AM  4 years agoPost 8
DJI Innovations

rrApprentice

Shenzhen, China

My Posts: All  Forum  Topic

DJI Lightbridge - 2.4G Full HD Digital Video Downlink
DJI Lightbridge will start shipping during February 2014. We will only have 500 units available this month so get your pre-orders in as soon as possible.

DJI Lightbridge is an all new revolutionary 2.4G Full HD digital video downlink. DJI Lightbridge offers extremely powerful equipment packed into a small and light-weight form factor. By offering 1920 x 1080p@30fps video data transmission from up to 1.7km (1.05miles) away, it's the ideal solution for the professional aerial photographer and FPV users. Set yourself free and remove the limits from low definition analog video transmitters.
[URL="

Watch at YouTube

Features:

2.4G Full HD Digital Video Downlink
-1920x1080@60fps input and 1920x1080@30fps output

Extreme Long Distance Transmission
-Less than 100mW ground unit transmission in full compliance with CE and FCC certification
-5dBi omni-directional antenna offers an enormous distance of up to 1.7 km (1.05 miles)
-Optional 14dBi patch antenna boosts transmission distance tremendously to 5km (3.1 miles)

Multiple Input And Output Connections
-AV input
-HDMI input
-DJI Zenmuse gimbal input (Digital Video/Power Supply/OSD Data)
-HDMI HD image output
-USB 2.0 image data output for iOS and Android phones and tablet synchronization

Built-in Remote Control Link
-Uplink remote control transmission and downlink video work simultaneously on 2.4GHz.
-Remote control data travels to the uplink via the TX-Thru Port at the same time that video is streamed back down all without interference.
-Support for two remote controls: one for flight control (10 Channels) and the other for gimbal control (6 Channels). Control signals are received in the air and then transmitted to the flight controller through D-BUS.
-When used with a non-2.4G radio transmitter, video only transmission operation is supported. The DJI 5.8G radio transmitter is recommended.

Strong Anti-Jamming Technology
-Frequency Hopping Spread Spectrum(FHSS) + Direct Sequence Spread System(DSSS) technology is used for uplink transmission to enhance stability and offer anti-jamming capability.
-MIMO multi-antenna technology and OFDM modulation methods along with advanced algorithms are utilized for downlink transmission to enhance data bandwidth, improving dynamic performance and increasing stability even in harsh environments.
-Channel interference is constantly monitored during downlink transmission with automatic switching between 8 channels for the best possible signal.
-Up to 8 downlinks can be connected for parallel streaming and work independently without interference.

Low Latency Transmission
Maximum latency of up to 80ms

Built-in OSD (On-Screen Display) Function
-No additional equipment required for OSD functions when used with A2/WooKong-M/Naza-M V2 flight controllers. Flight parameters will be displayed onscreen.
-OSD functionality can be turned off via mobile software for HDMI and iOS/Android Output.

Must Work With DJI Multi-Rotor Flight Controllers
-DJI A2, WooKong-M and Naza-M V2 flight controllers
-Phantom 2, with DJI 5.8G radio transmitter.

Multi-device Operation Mode, Stable and Reliable
-A single air unit can transmit to multiple ground units sending video to multiple screens. (Only one of the ground units can send a control signal while additional ground units will only be able to receive a video signal)
-Encryption ensures only authorized devices can receive data which can be programmed via mobile device software.

Built-in High Capacity Battery
-Ground unit has a built in high capacity 4000mA battery offering up to 4.5hours of use per charge.
-Rechargeable through the supplied charger or via a 3S~6S Li-Po power battery.A full charge takes approximately 1.5 hours.
-LED battery level indicator
-Also functions as a USB charger for mobile devices prolonging the life of peripheral equipment.

Electromagnetic Interference Shielded Structural Design
-Aluminum alloy casing
-Extreme internal and external shielding for interference protection.

PM  EMAIL  Attn:RR  Quote
02-10-2014 03:17 PM  4 years agoPost 9
Dr.Tim

rrElite Veteran

Mojave Desert

My Posts: All  Forum  Topic

FULL HD !!!
A Must Have !!

From Simple minds come simple ideas! Approach Engineering

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-13-2014 04:18 AM  4 years agoPost 10
Tahoe Ed

rrNovice

Lake Tahoe, NV USA

My Posts: All  Forum  Topic

Dr Tim it is way cool. Not for everyone but it works as advertised.

PM  EMAIL  Attn:RR  Quote
03-07-2014 11:36 AM  4 years agoPost 11
DJI Innovations

rrApprentice

Shenzhen, China

My Posts: All  Forum  Topic

DJI - A2 V2.1 Firmware Upgrade Tutorial Video

Watch at YouTube

Please click here for more information.

PM  EMAIL  Attn:RR  Quote
04-30-2014 12:56 PM  4 years agoPost 12
DJI Innovations

rrApprentice

Shenzhen, China

My Posts: All  Forum  Topic

DJI has released its 2.4G Full HD digital video downlink, the DJI Lightbridge
DJI Lightbridge is a revolutionary 2.4G Full HD digital video downlink offering extremely powerful technology in a small and lightweight form. By offering 1920 x 1080p@30fps video data transmission from up to 1.7km (1.05 miles) away, it's the ideal solution for professional aerial creators and FPV users. It features an aluminum alloy casing, and extreme internal and external shielding for interference protection. Recharging can be done through the supplied charger or a 3S~6S Li-Po battery. Each charge lasts for up to 4.5 hours. Give your creativity a boost with pin sharp imagery today.

DJI - Introducing the Lightbridge Video

Watch at YouTube

Watch at YouTube

Watch at YouTube

Features:
  • 1920 x 1080p@30fps video data transmission
  • Up to 1.7km (1.05 miles) long distance transmission
  • System latency of approximately 150ms
  • Built-in 2.4G remote control link
  • DJI multirotor flight controller required: A2/WKM/Naza-M V2/Phantom 2

Mobile device support
  • USB charger for mobile devices functionality, prolonging the life of peripheral equipment.
  • USB mobile device charging support.
  • USB 2.0 image data output for iOS and Android synchronization
  • Android 4.1.2 or above recommended

Built in OSD (On-Screen Display)
OSD is available natively, no additional equipment required.

Anti-interference technology

Up to 8 downlinks can be connected for parallel streaming. Each can work independently without interference with proper distance between them.

Multi-device operation

A single air system can transmit to multiple ground systems, sending video to multiple screens. One ground system will send the control signal while additional ground systems receive the video signal

Advanced security

Encryption ensures that only authorized devices receive data. Encryption can be set up through the Lightbridge app.

Please click here for more information.

DJI Lightbridge 2.4G full HD digital video downlink price adjustment announcement

As the DJI Lightbridge 2.4 G full HD digital video downlink has been delayed for some time, DJI has lowered its price to make up for the long wait. We have also optimized and improved its performance significantly ensuring it meets the needs of professional aerial creators.
In the first batch of units shipped, we will also be providing an accessory bag free to thank early buyers for their patience. This accessory pack includes

a smartphone holder

a ground system stand

an HDMI cable for Phantom 2 users

For details on specific price adjustments and the free accessories pack, please contact your dealer. Thanks for your support!

PM  EMAIL  Attn:RR  Quote
05-08-2014 01:13 PM  4 years agoPost 13
DJI Innovations

rrApprentice

Shenzhen, China

My Posts: All  Forum  Topic

DJI Lightbridge Notice

Dear DJI users,

Light Bridge has been released and we got feedback from some of our end users that they need a solution to use with WKM/A2 + Zenmuse platform other than Phantom 2. Considering this, DJI will ship GIMBAL Port To CAN cables and AV cables to dealers shortly. Users who already bought Light Bridge please contact your dealer to get these 2 cables for free.

Solution for WKM/A2 with Zenmuse gimbal.
Parts needed: (Available at your dealers)
1.GIMBAL Port To CAN cable
2.AV Cable
3.DJI 5.8G Radio

IMPORTANT NOTE:
Use your own 2.4G radio to control your multi-rotor via Light Bridge, and DJI 5.8G radio to control directly the Zenmuse gimbal. Never use 2.4G radio for gimbal control since it will interfere Light Bridge.

Please click here for more information.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 4389 views POST REPLY
HomeAircraftMulti-Rotor
e-
Multi-Rotor Main Discussion
DJI News  DJI A2 Multi-Rotor Flight Control System Has Been Available!
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Tuesday, October 16 - 3:29 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online