RunRyder RC
WATCH
 1 page 905 views POST REPLY
HomeAircraftHelicopterHIROBOHirobo SDX › SDX/Sceadu DTDS Derin Gear set 0412-168
09-03-2013 08:00 PM  4 years agoPost 1
ssrobzoom

rrKey Veteran

Tn

My Posts: All  Forum  Topic

I have some missing screws in my Sceadu/SDX - SD DTDS Derin Gear set 0412-168. The secondary gear is held on my four Flat Head screws. does anyone know the size of the screws. I cannot locate any documentation on this gear set to reorder the replacements.

Below are picture of the gear set. It's the counter sunk phillips screws in the seconary gear that I'm missing:

PM  EMAIL  GALLERY  Attn:RR  Quote
09-03-2013 08:06 PM  4 years agoPost 2
payne1967

rrElite Veteran

uk

My Posts: All  Forum  Topic

i would say they are the same screws that are used to hold the cooling fan on

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-04-2013 03:46 AM  4 years agoPost 3
petiteway

rrApprentice

Melbourne, Australia

My Posts: All  Forum  Topic

M3x6 countersunk

PM  EMAIL  Attn:RR  Quote
09-04-2013 12:50 PM  4 years agoPost 4
Mike0251

rrVeteran

Hills of the Blue Ridge VA

My Posts: All  Forum  Topic

They are smaller than the cooling fan screws.
Cooling fan screws are M3x6
These little buggers are M2.6x6
Part number 2538-012 or 2538012...all depends on how the seller codes it. MRC is 2538012 and out of stock. You will most likely have to go to RC Japan.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-04-2013 01:35 PM  4 years agoPost 5
TMoore

rrMaster

Cookeville, TN

My Posts: All  Forum  Topic

McMaster has 2.5 x.45 x 6mm in stainless.

Delayed Response Operator Not Engaged
AMA SECTION 336 = Good
Drones = EVIL

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-05-2013 05:37 PM  4 years agoPost 6
IYKIST

rrKey Veteran

London united kingdom

My Posts: All  Forum  Topic

2.5mm x 6 will work the same

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 905 views POST REPLY
HomeAircraftHelicopterHIROBOHirobo SDX › SDX/Sceadu DTDS Derin Gear set 0412-168
 Print TOPIC  Make Suggestion 

 5  Topic Subscribe

Thursday, August 16 - 1:33 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online