RunRyder RC
WATCH
 1 page 459 views POST REPLY
09-02-2013 07:44 PM  4 years agoPost 1
Bladebuster

rrApprentice

Bayside N.Y.

My Posts: All  Forum  Topic

Having a hard time removing prop hub from g20.
Instructions in manual don't work. Any suggestions.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-03-2013 05:24 PM  4 years agoPost 2
RM3

rrElite Veteran

Killeen, Texas - USA

My Posts: All  Forum  Topic

EDIT...you ment the prop hub...

best to use a small 2 or 3 jaw puller from most auto parts stores..they work quite easily...just make sure you loosen the hub stud first 3 turns or so first.

showing a preference will only get you into trouble, 90% of everything is crap...

PM  EMAIL  GALLERY  Attn:RR  Quote
10-02-2013 03:55 AM  4 years agoPost 3
keiser BLADE

rrApprentice

WV USA

My Posts: All  Forum  Topic

I had a tough time too, I ended up taking the prop stud out, holding the hub with a vise grip, and used a punch that was small enough not to touch the threads, couple taps with a hammer it was off. don't recommend this way its harder, and if not careful u could damage the threads in the crank. I senond what rm said with the puller

Brandon

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 459 views POST REPLY
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, August 14 - 9:05 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online