RunRyder RC
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2010 views POST REPLY
Home✈️Aircraft🚁HelicopterBeginners Corner › TAIL SPIN ON SPOOLUP
08-03-2013 10:08 PM  5 years ago
Topic Vote0Post 1
BENTDABOOM

rrKey Veteran

west seattle

MyPosts All Forum Topic
TAIL SPIN ON SPOOLUP
not really a beginer but having to learn all over again
we gotta rap 30 and when I throttle up the tail wants to spin. I tried in HH and rate but it still wants to spin, what am I doing wrong and how do I fix it?
CAUTION!!! politicians may be hazerdous to your well being
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 10:25 PM  5 years ago
Ghostrider

rrElite Veteran

San Diego, CA

MyPosts All Forum Topic
Reverse your tail servo in the radio or on the gyro depending on what you are running.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 10:31 PM  5 years ago
GyroFreak

rrProfessor

Orlando Florida ...28N 81W

MyPosts All Forum Topic
Besides whats stated above,
the tail rotor may be on the wrong side. the servo horn may be reversed or, if belt driven tail the belt may be inverted. Now these things I mention are if it has been worked on and the radio setup used to be correct.
EDIT: Another item, has the gyro been mounted upside down or incorrectly for it's settings. And of course a bad tail gyro or tail servo can cause havoc with tail control.
I think about the hereafter. I go somewhere to get something, then wonder what I'm here after ?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 10:45 PM  5 years ago
BENTDABOOM

rrKey Veteran

west seattle

MyPosts All Forum Topic
Tr is on the right side looking from the back
the main rotor turns CW and looking from the right side TR turns CCW
so am assuming the belts on right?
its the 1st spoolup since Ive gotten the model and from past experience believe everythings right.... have delt with this problem b4 but all the past knowledge is gone
CAUTION!!! politicians may be hazerdous to your well being
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 10:56 PM  5 years ago
Heli Fanatix

rrVeteran

Fountain Valley, CA

MyPosts All Forum Topic
Sounds like the belt is setup right

Check your collective.....too much pos will make you spin.
At mid throttle stick ....you'll want to be @ zero or no more than -/+ 2
Double check your gyro compensation:
If you are looking from behind
- move tail right (goes with torque of rotor)
- pitch slider should move left (towards boom)

Let us know if this helps

- Scott
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 11:03 PM  5 years ago
GyroFreak

rrProfessor

Orlando Florida ...28N 81W

MyPosts All Forum Topic
Do some ground testing with the motor off. If you move the rudder to the left, does the pitch of the tail blades look correct, same for right rudder. Then with the rudder control centered, when you move the model (rotational) does the tail blades move in the correct direction attempting to correct.I think about the hereafter. I go somewhere to get something, then wonder what I'm here after ?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 11:04 PM  5 years ago
BENTDABOOM

rrKey Veteran

west seattle

MyPosts All Forum Topic
pitch curve is -1 +6 + 9 throttle curve 0-25-50-75-100

looking from behind and tail blades are up/down" when I give right rudder top blade at the bottom is out.another note is TR seems to be sensitive and looks like its moving too much and too fast, am using a standard T servo, non DS

online now and will be waiting for some answers, thanx
CAUTION!!! politicians may be hazerdous to your well being
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 11:05 PM  5 years ago
wrongler

rrProfessor

Brewerton, New York

MyPosts All Forum Topic
Make sure tail blades are on correctly.Bill Whittaker
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 11:10 PM  5 years ago
BENTDABOOM

rrKey Veteran

west seattle

MyPosts All Forum Topic
yes tail B are on right leading edge moving CCW when viewing from the right sideCAUTION!!! politicians may be hazerdous to your well being
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 11:12 PM  5 years ago
wrongler

rrProfessor

Brewerton, New York

MyPosts All Forum Topic
Did you check for leading edge control or trailing?Bill Whittaker
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 11:15 PM  5 years ago
BENTDABOOM

rrKey Veteran

west seattle

MyPosts All Forum Topic
LE controlling ?? looking from the top they turn CWCAUTION!!! politicians may be hazerdous to your well being
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 11:19 PM  5 years ago
BENTDABOOM

rrKey Veteran

west seattle

MyPosts All Forum Topic
update, just spooled up and when giving left rudder stick the nose moves left, could this be wrong and if not how would that acct for the tail spin??

when I flew early today it was in HH then changed to rate and noticed if I put the rudder stick in the center it still wanted to spin, messed with rev mixing but didn't seem to help
CAUTION!!! politicians may be hazerdous to your well being
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 11:28 PM  5 years ago
wrongler

rrProfessor

Brewerton, New York

MyPosts All Forum Topic
http://www.helifreak.com/attachment...93&d=1248609216

This is leading edge control the links for the tail are on the leading edge of the blade. If it were trailing edge they would be on the opposite side.

Left input on rudder will move nose to the left. That is correct.
Bill Whittaker
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 11:33 PM  5 years ago
BENTDABOOM

rrKey Veteran

west seattle

MyPosts All Forum Topic
yes that pic is what my Tail B looks like, still doesn't acct for the spinning problem when I throttle upCAUTION!!! politicians may be hazerdous to your well being
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 11:39 PM  5 years ago
wrongler

rrProfessor

Brewerton, New York

MyPosts All Forum Topic
Are the link on the tail slider in the same position? If they are my guess is set up in the gyro is incorrect.Bill Whittaker
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 11:53 PM  5 years ago
flyingmotorbike

rrApprentice

Lancs UK

MyPosts All Forum Topic
gyro compensating the wrong way makes it spin
just reverse the gyro.
on the gyro itself not in the radio
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-03-2013 11:54 PM  5 years ago
BENTDABOOM

rrKey Veteran

west seattle

MyPosts All Forum Topic
how can the gyro be set wrong?CAUTION!!! politicians may be hazerdous to your well being
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-04-2013 12:04 AM  5 years ago
BENTDABOOM

rrKey Veteran

west seattle

MyPosts All Forum Topic
motorbike don't ask me why but think we gotta winner and seems to be working right, altho the tail is a bit sensitive, how can I correct that ? thanxCAUTION!!! politicians may be hazerdous to your well being
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-04-2013 12:08 AM  5 years ago
wrongler

rrProfessor

Brewerton, New York

MyPosts All Forum Topic
Not sure what you mean by sensitive, but you can lower the EXPO.Bill Whittaker
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-04-2013 12:16 AM  5 years ago
flyingmotorbike

rrApprentice

Lancs UK

MyPosts All Forum Topic
if it is a 401 then reducing the servo travel on rudder channel actually reduces piro rate ie speed of rotation
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 2010 views POST REPLY
Home✈️Aircraft🚁HelicopterBeginners Corner › TAIL SPIN ON SPOOLUP
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, July 24 - 2:09 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online