RunRyder RC
WATCH
 1 page 1593 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Logo 600 › Mikado support mail
05-27-2013 07:11 AM  5 years agoPost 1
luixitoyo

rrApprentice

Lausanne - Switzerland

My Posts: All  Forum  Topic

Hi guys:
I have several compatibility questions about uvular fuse. I wrote several mails to the mail that appears on Mikado web, but don´t get response. Do somebody knows any other mail?¿

Thanks a lot!

PM  EMAIL  GALLERY  Attn:RR  Quote
05-27-2013 02:51 PM  5 years agoPost 2
dahld

rrKey Veteran

Bakersfield, CA, USA

My Posts: All  Forum  Topic

I can't speak as to why Mikado is taking so long to answer. But, what's the question? Maybe you can get the answer here on the forum.

(-: Dave

PM  EMAIL  GALLERY  Attn:RR  Quote
05-28-2013 07:22 AM  5 years agoPost 3
luixitoyo

rrApprentice

Lausanne - Switzerland

My Posts: All  Forum  Topic

I want to mount a Uvular fuselage in a carbon framed Logo 600SE.
Want to know if the mounting holes for the canopy are in the same position in both plastic and carbon frames.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-28-2013 06:55 PM  5 years agoPost 4
dahld

rrKey Veteran

Bakersfield, CA, USA

My Posts: All  Forum  Topic

Well, you asked a question I'm sorry I can't answer with absolute certainty. I've yet to see or know of a carbon framed Logo installed in a Uvular. Although the standard Logo canopy fits both the plastic and carbon frames, I would hesitate to say the mounts are EXACTLY the same, and have you spend money on my recommendation when I don't know FOR SURE.

If they ARE slightly different (not saying they are...I just don't know for sure), the fit into the fuse might be difficult.

)-: Dave

PM  EMAIL  GALLERY  Attn:RR  Quote
05-28-2013 08:26 PM  5 years agoPost 5
Jesse Kavros

rrApprentice

San Jose, California

My Posts: All  Forum  Topic

The only reason I would hesitate, is because of the mounting bolts for the landing gear. On the carbon frame I believe they use bigger screws at a further distance apart, compared to the plastic frame, which uses smaller bolts at a closer distance together.

Jesse

MSH
Scorpion
Xpert RC
VTX

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-29-2013 07:43 AM  5 years agoPost 6
luixitoyo

rrApprentice

Lausanne - Switzerland

My Posts: All  Forum  Topic

So It could be neccesary to change the bolt position/size in the undercarriage bows... I ordered the carbon chasis and in a month I could order the uvular so I will tell you.
Hope Mikado answer before...

PM  EMAIL  GALLERY  Attn:RR  Quote
06-03-2013 02:17 PM  5 years agoPost 7
luixitoyo

rrApprentice

Lausanne - Switzerland

My Posts: All  Forum  Topic

Thanks a lot to all people.
The problem with Mikado support was mine... all his answers went to my spam folder... I don´t know why.
My excuses to Mikado support.

PM  EMAIL  GALLERY  Attn:RR  Quote
01-06-2014 06:28 AM  4 years agoPost 8
XLr8r

rrApprentice

Southern California

My Posts: All  Forum  Topic

Well, did it fit?

XLr8r

PM  EMAIL  GALLERY  Attn:RR  Quote
01-14-2014 07:03 PM  4 years agoPost 9
RPM 1.5

rrKey Veteran

Cape May New Jersey

My Posts: All  Forum  Topic

I have sent 3 email to them over the last couple of months and still never got a answer???????
I guess they do not care about customer service not answering emails
I have 4 V Bars 1 Mini and 3 Full Size
And my Mini needs to go back for service now and sent another email
I can not log into my account because they can't find my email address ??????
But when it came to $45.00 charge they sure took it with no problem
Sent email to them AGAIN. 3 days ago and still no answer from them ,all the V Bars are registered with them I gave full name address and number with email
Ray

PM  EMAIL  GALLERY  Attn:RR  Quote
01-14-2014 10:31 PM  4 years agoPost 10
XLr8r

rrApprentice

Southern California

My Posts: All  Forum  Topic

I too am wanting to put a carbon framed 600se in a Uvular. Please post back when you have some answers. I will keep checking back.

Thx XLr8r

PM  EMAIL  GALLERY  Attn:RR  Quote
01-15-2014 04:10 AM  4 years agoPost 11
tonyh86

rrNovice

Tampa, FL

My Posts: All  Forum  Topic

Yes the carbon frame fits in the uvular fusealage, download the manual here for the carbon frame uvular to see the minor modifications needed to make it fit

http://heli-center-berlin.de/index....3-1-uvular.html

PM  EMAIL  GALLERY  Attn:RR  Quote
01-19-2014 08:43 AM  4 years agoPost 12
XLr8r

rrApprentice

Southern California

My Posts: All  Forum  Topic

Thx Bro, I appreciate it

XLr8r

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1593 views POST REPLY
HomeAircraftHelicopter
e-
Mikado
Logo 600 › Mikado support mail
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, August 18 - 9:42 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online