RunRyder RC
WATCH
 1 page 2189 views POST REPLY
Home✈️Aircraft🚁Helicoptere-BladeBlade 130 › 130x and ds 35 servo
05-06-2013 08:50 PM  6 years ago
Topic Vote0Post 1
monkeyhand

rrNovice

northeast md usa

MyPosts All Forum Topic
130x and ds 35 servo
I put new ds 35 on and have a tail wag that I can not get out. Have all micro heli tail set-up with micro heli servo mount,stock push rod. any sugg. would be helpful. Thanks Dwayne
SHARE  PM  EMAIL  Attn:RR  Quote
05-06-2013 11:55 PM  6 years ago
flyride

rrKey Veteran

Salt Lake City UT

MyPosts All Forum Topic
Bad tail shaft bearings will cause a wag. Did you try to adjust the gyro gain, maybe with the new servo it doesn't need to be as high or maybe the ball link too far out on the servo horn. Not sure just trying to through out suggestions to look at.and the blonde said "RECTUM, Hell damn near killed em!!"
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-07-2013 12:44 AM  6 years ago
BladeScraperz

rrApprentice

Nor Cal

MyPosts All Forum Topic
It seems that all new servos released recently have a bad tail wag, whereas the original ones didnt. Had to go back to original servos.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-07-2013 02:03 AM  6 years ago
monkeyhand

rrNovice

northeast md usa

MyPosts All Forum Topic
I have moved gain to default to 0 and all between. new bearings in tail case.
SHARE  PM  EMAIL  Attn:RR  Quote
05-16-2013 03:38 PM  6 years ago
drdot

rrElite Veteran

So. California, Orange County.

MyPosts All Forum Topic
fwiw..

Been documented on other forums that the new DS 35 servo doesn't work due to a change in the driver board....Apparently there are Walkera servos which will work, but I've not tried them....

John.

p.s. Now have 12 flights on the Walkera 3-04 from a vdo120...Working very well, no wag, holds better than stock....Running -3 on gain.....

John.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-16-2013 07:54 PM  6 years ago
bldfrt

rrApprentice

elkland, pa

MyPosts All Forum Topic
Did you put a rubber o-ring on the lever arm? helped a lot on mine.Have fun, Fly safe!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-02-2013 06:02 AM  6 years ago
JC Aguilar

rrNovice

Panama, Panama

MyPosts All Forum Topic
I had the same problem when i installed the ds35 new version - had to go back to the stock servo until i got the wk-03-4 from HK. It is the drop in replacement for your ds35. Have to solder your old servo connector, but it will fly great.

JC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 2189 views POST REPLY
Home✈️Aircraft🚁Helicoptere-BladeBlade 130 › 130x and ds 35 servo
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, February 18 - 12:11 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online