I am trying to set up the retract gear for Bell 222 with JR X9303 radio (9 channel receiver).
I choose Aux 3 channel to control 3 servos by Aux 2 switch (3 position switch), I also use a reversed device to change one servo direction.
When testing, I switch Aux 2 switch by one position, only one servos work but when I switch 2 position at the same time (2 clicks) then all three servo work perfectly. However, the servos travel is ~ 180 degree, which is more than what I need. I go to Travel Adjust to reduce the travel, but it does not work even when I reduce to 10% and when I go to 0% it stops everything, so it either work full range of travel or does not work.
If any one know how to set up to get the right range that I want, please help me.
Thanks in advance,