RunRyder RC
WATCH
 1 page 609 views Post Reply
HomeRC & Power✈️Aircraft🚁Helicoptere-Electric Battery-Charger-pSupply › Help programming the icharger 306B.
04-24-2013 03:09 AM  7 years ago
Topic Vote0Post 1
Scott1115

rrElite Veteran

Greenwich, CT

MyPosts All Forum Topic
Help programming the icharger 306B.
I read the PDF manual (p. 25) and tried it as described but I did not do it correctly, as it did not do what I wanted. I have three battery set-ups I want to program. Here are the packs and the parameters I tried to set up:
1. Single 5300 mAh pack, 6S
-->Balance charge at 10.6 amps (2C), max capacity cut-off at 5000 mAh
2. Pair of 5300 mAh packs, 6S
-->Balance charge at 21.2 amps (2C), max capacity cut-off at 10000 mAh
3. Pair of 3300 mAh packs 6S
-->Balance charge at 13.2 amps (2C), max capacity cut-off at 6000 mAh

I was able to name the three set-ups as “53,” “2x53,” and “2x33.” Beyond that, it did not accept my set-ups. When I closed the set-up screen and then went and re-opened it, it shows the default values.

Can someone please walk me through how to do this correctly?
Compass 7HV, Trex 550E
RCRCC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-24-2013 06:40 PM  7 years ago
eddiscus

rrElite Veteran

Dumont, NJ-USA

MyPosts All Forum Topic
Did you follow steps outlined on page 25 including holding down the start button for more than 3 seconds to save to one of the 9 locations 00-09.Logo Xxtreme 800
Logo 700
Citizen 142
Synergy 766
TDR 2
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-24-2013 06:43 PM  7 years ago
Scott1115

rrElite Veteran

Greenwich, CT

MyPosts All Forum Topic
After making changes, I pressed and held Start/Enter button for more than 3 seconds. I would have thought the display would say "Save..."? But nothing.

I am not able to go into the Data Load program (press Start/Enter for more than 3 seconds) to load the preset.
Compass 7HV, Trex 550E
RCRCC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-24-2013 07:06 PM  7 years ago
eddiscus

rrElite Veteran

Dumont, NJ-USA

MyPosts All Forum Topic
Do you have the latest firmware installed? 3.14

Seems like you would as it has not been changes since 2010.

Something sounds wrong.
Logo Xxtreme 800
Logo 700
Citizen 142
Synergy 766
TDR 2
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-24-2013 07:09 PM  7 years ago
eddiscus

rrElite Veteran

Dumont, NJ-USA

MyPosts All Forum Topic
How about if you press INC and start enter at the same time for more than 3 seconds?Logo Xxtreme 800
Logo 700
Citizen 142
Synergy 766
TDR 2
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-24-2013 07:17 PM  7 years ago
Scott1115

rrElite Veteran

Greenwich, CT

MyPosts All Forum Topic
Will have to check when I get home.Compass 7HV, Trex 550E
RCRCC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 609 views Post Reply
HomeRC & Power✈️Aircraft🚁Helicoptere-Electric Battery-Charger-pSupply › Help programming the icharger 306B.
Print TOPIC

 1  Topic Subscribe

Friday, September 25 - 11:22 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online