RunRyder RC
WATCH
 1 page 2109 views POST REPLY
HomeRC & PowerAircraftHelicopter
e-
Electric Motors-Controllers-ESC
ESC › YGE 320HV with 16S????
04-23-2013 12:24 PM  5 years agoPost 1
luckyhs

rrApprentice

Brasil

My Posts: All  Forum  Topic

Hi guys,
I want make an LOGO 700 XXTREME with 16S, i just got the YGE 320HV with KONTRONIK PYRO 800-40L (17 pinion), GRYPHON REGULATOR, THUNDER POWER 8S 70C 3850MAH X2.
I just made the ESC YGE SETUP as MrMel's video, the only thing that i didn't see in the progcard is how to put 16S on the progcard, as it shows only max 15S, is this count cell on the progcard automatic or how can i put 16S in the progcard???

luckyhs

PM  EMAIL  Attn:RR  Quote
04-23-2013 02:07 PM  5 years agoPost 2
wrongler

rrProfessor

Brewerton, New York

My Posts: All  Forum  Topic

Just check my procard, It's not here either!

Bill Whittaker

PM  EMAIL  GALLERY  Attn:RR  Quote
04-24-2013 01:25 AM  5 years agoPost 3
luckyhs

rrApprentice

Brasil

My Posts: All  Forum  Topic

Nobody could help please???
Wrongler,

I think your progcard is the same as mine, so i don't know how to setup the number of cells in the progcard to 16S.

Luciano

luckyhs

PM  EMAIL  Attn:RR  Quote
04-24-2013 01:39 AM  5 years agoPost 4
R.J.

rrVeteran

SF bay area, CA USA

My Posts: All  Forum  Topic

I believe you need to send the ESC in to YGE to have the factory upgrade it to 16S.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-24-2013 12:18 PM  5 years agoPost 5
luckyhs

rrApprentice

Brasil

My Posts: All  Forum  Topic

Hi RJ,

Don't need to send to YGE factory, this YGE320HV is ready to go 16s, the only thing i want know is how to setup 16s on the progcard, as the progcard only shows 15s max.

luckyhs

PM  EMAIL  Attn:RR  Quote
04-24-2013 12:38 PM  5 years agoPost 6
TomC

rrKey Veteran

Gold Coast, Queensland, Australia

My Posts: All  Forum  Topic

I think you may just pick the highest number, say 14s (which is all my prog card2 goes to) and adjust the low voltage cutoff accordingly.

So, if you were going to use 3.2v/cell cutoff on 16s you could select 14s on the card and use (14/16)x3.2 = 2.8v/cell. If your card goes to 15s then it would be (15/16)x3.2 = 3.0v/cell.

Probably still best to check with yge tech support.

Cheers,
TomC

Nqx,Mcpx-BL,300x,450x,500x,550x
Ion-x, 10s ,SS
TT X50E 10s, HC3-Sx

PM  EMAIL  GALLERY  Attn:RR  Quote
04-24-2013 03:09 PM  5 years agoPost 7
luckyhs

rrApprentice

Brasil

My Posts: All  Forum  Topic

Hi TomC
I didn't find where i can contact YGE SUPPORT, that's why i'm asking to anybody who has used this YGE 320HV with 16s???
If you do find the support send to me please.

Thanks buddy

luckyhs

PM  EMAIL  Attn:RR  Quote
04-24-2013 09:42 PM  5 years agoPost 8
Chuck Bole

rrElite Veteran

Tulsa Ok. U.S.A.

My Posts: All  Forum  Topic

I have a YGE 160Hv that is 16S ready and the prog card only shows 15S as well.. I haven't tried 16S yet so i don't have any experience with that but the contact for YGE is.. info@yge.de

chuck

Team Synergy Field Representative / Thunder Power

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-24-2013 10:04 PM  5 years agoPost 9
TomC

rrKey Veteran

Gold Coast, Queensland, Australia

My Posts: All  Forum  Topic

Sorry this is the only YGE contact info I could find;

Sales and service of electronic modules
Management: Heino Jung - nat. Person
Vechtaer yard 30
D-49088 Osnabrück

Phone 0541-60099442
FAX. 0541-14634

VAT Reg. DE 175708959
WEEE-Reg.-No. DE 59845000

Note; also see e-mail address from chuck

Based on a couple responses you got on another forum it sounds like you just need to leave the cell count lights blank and let it auto detect.

I guess you could also just disable low voltage detection and/or select nimh battery type. Then just use another method to detect low battery voltages (telementry, on-board checkers, for example).

I'm sure you will figure out a way around this. Also a bit disappointing that YGE appears to have pretty limited tech support. Maybe contact the dealer you bought your esc from.

Good luck and cheers,
TomC

Nqx,Mcpx-BL,300x,450x,500x,550x
Ion-x, 10s ,SS
TT X50E 10s, HC3-Sx

PM  EMAIL  GALLERY  Attn:RR  Quote
04-24-2013 11:00 PM  5 years agoPost 10
Chuck Bole

rrElite Veteran

Tulsa Ok. U.S.A.

My Posts: All  Forum  Topic

send a EMail to Heino..
He'll get back to you. He has answered my E Mails no problem.

chuck

Team Synergy Field Representative / Thunder Power

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-25-2013 02:20 AM  5 years agoPost 11
luckyhs

rrApprentice

Brasil

My Posts: All  Forum  Topic

Heino email???
Hi Chuck,

Could you give Heino's email, you could send it via PM, i have other questions about this esc.

Thanks a lot..

Luciano

luckyhs

PM  EMAIL  Attn:RR  Quote
04-25-2013 02:31 AM  5 years agoPost 12
Chuck Bole

rrElite Veteran

Tulsa Ok. U.S.A.

My Posts: All  Forum  Topic

Sure, but the E Mail address i posted above is the address he answered me back from.

chuck

Team Synergy Field Representative / Thunder Power

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-21-2013 10:53 AM  5 years agoPost 13
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

Out of curiosity why not 12 or 14s as its a 700?

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-21-2013 12:19 PM  5 years agoPost 14
luckyhs

rrApprentice

Brasil

My Posts: All  Forum  Topic

16S
Hi Richard,
Just want give it a try, as i have tried 14S with great success i'll have the oportunity to try on 16S, i'm just waiting the batteries, i have the same weight like 12S but more power, i'm using 753 EDGE and THUNDER POWER 8S 3850mahs 65C X2.
I think we all need more power everytime...kkk

luckyhs

PM  EMAIL  Attn:RR  Quote
05-21-2013 12:29 PM  5 years agoPost 15
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

Wow I never knew you could run 750's on the logo 700! Neat!

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-21-2013 01:02 PM  5 years agoPost 16
luckyhs

rrApprentice

Brasil

My Posts: All  Forum  Topic

You could run them with no problems, the manual says it.

luckyhs

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 2109 views POST REPLY
HomeRC & PowerAircraftHelicopter
e-
Electric Motors-Controllers-ESC
ESC › YGE 320HV with 16S????
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Monday, October 15 - 5:49 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online