RunRyder RC
WATCH
 1 page 804 views Post Reply
04-22-2013 12:03 PM  7 years ago
Topic Vote0Post 1
BK479

rrApprentice

usa

MyPosts All Forum Topic
copter x cx3 1000
I have a copter x cx3 1000 unit and was wanting know if any one has tried it on a 600 nitro and what they thought about it ? Did it hold and did it do any thing stupid. I did a search and all it realy pulls up is on 450 stuff. my friend has 3 of them on 450 size helis and they work realy well but don't know about nitros
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-27-2014 11:21 PM  5 years ago
Copter Doctor

rrProfessor

Enterprise/ft.rucker ,al- home of army aviation

MyPosts All Forum Topic
Anyone?drive a rotary, fly a rotorcraft
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-28-2014 02:36 AM  5 years ago
dcasole

rrApprentice

Dacula GA

MyPosts All Forum Topic
I converted two of my Sceadu's to FBL using this controller. I love the controller but liked the FB "feel" better so I converted one of them back

I use one in my 450 also

As long as you have a well set up heli I can assure u that it will not do anything stupid

I have a good friend that flys The tarrot version which is the same controller on everything from a 450 up to a 700 electric

Simple setup with a laptop ..... and presets for every flying style ( I do recomend starting off in the beginner mode or f1 till you fly it. Then change to 3d or extreme)

Dave
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-28-2014 03:04 PM  5 years ago
Copter Doctor

rrProfessor

Enterprise/ft.rucker ,al- home of army aviation

MyPosts All Forum Topic
thanks for your response. ive wondered about the setup and performance. I have two units I got in a trade but no instructions. what is required to use your laptop to set things up. I'm sure a usb cable but do you need a software disc as well?
thanks,
Emile
drive a rotary, fly a rotorcraft
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-28-2014 05:23 PM  5 years ago
dcasole

rrApprentice

Dacula GA

MyPosts All Forum Topic
U need the USB cable for the copter X unit (the tarot cable will not work)
Wow hobbies in calif. Has them
The software is available for download at
http://Www.ky-model.com/support.html

the instructions are there also

Another program u can use is located at http://fbl.net.nz/

Both are great and will walk you thru the setup. Once it is loaded open the program and click on setup to the right . Follow the directions for the 11 tabs at the top of the program . When you are done click finish . The the page will go back to the main screen . Click on beginner and then force update

it is the easiest setup I have ever done . It's fbl for dummies lol lol

make sure after you plug in the cable you find out what com port your computer assigned to it as you will have to set this in the software . The biggest complaint is that they can't get the unit to program and 99% of the time the com port is wrong . If you are connected the 3 red lights to the right will turn green

remember don't set it to 3d out of the box . Set it to beginner and fly it around . Then change it fc3 settings .... After that be careful as when u get to the 3d settings ............

let me know how it works out for u

Dave
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
10-29-2014 07:59 PM  5 years ago
Copter Doctor

rrProfessor

Enterprise/ft.rucker ,al- home of army aviation

MyPosts All Forum Topic
Wow, awsome info, thank u so much. I will certainly let you know how it goes :-)drive a rotary, fly a rotorcraft
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 804 views Post Reply
Print TOPIC

 2  Topic Subscribe

Thursday, October 1 - 4:30 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online